Suzhou Crever Fastener Co., Ltd |
|
1/4" X 3/4" Nylon Nails It Mushroom Head Metal Screw With Anchor
Plastic Expansion Wall Plugs
1. Descriptions:
Nylon Nail-it Anchors are designed for anchoring
into concrete, brick or block. Insert the anchor into a pre-drilled
hole in concrete, and set the anchor by driving the nail into the
anchor. The nail creates the expansion of the nylon nail-it anchor
into concrete, brick or block.Hammer Drive Anchors, sometimes
referred to as nail or pin drive anchors, consist of an expander
drive pin and an expansion sleeve. Once the anchor is placed into a
pre-drilled hole, the nail or "pin" is hammered into the anchor
causing it to expand and wedge itself into the concrete or masonry
forming a tight fit. A male type anchor, hammer drive pin anchors
are available in inch or metric sizes. The pin material of most
hammer-set anchors are crafted of zinc-plated steel, Zamac alloy or
stainless steel, while the expansion sleeve can also be made of
nylon.
2. Specifications:
Anchor Size(mm) | Drill Dia(mm) | Plug Length | Screw Size(mm) |
5 x 25 | 5 | 25 | 3.5 x 28 |
5 x 30 | 5 | 30 | 3.5 x 33 |
5 x 35 | 5 | 35 | 3.5 x 38 |
5 x 40 | 5 | 40 | 3.5 x 43 |
5 x 50 | 5 | 50 | 3.5 x 53 |
6 x 30 | 6 | 30 | 3.8 x 33 |
6 x 35 | 6 | 35 | 3.8 x 38 |
6 x 40 | 6 | 40 | 3.8 x 43 |
6 x 45 | 6 | 45 | 3.8 x 48 |
6 x 50 | 6 | 50 | 3.8 x 53 |
6 x 55 | 6 | 55 | 3.8 x 58 |
6 x 60 | 6 | 60 | 3.8 x 63 |
6 x 70 | 6 | 70 | 3.8 x 73 |
6 x 80 | 6 | 80 | 3.8 x 83 |
6 x 100 | 6 | 100 | 3.8 x 103 |
8 x 40 | 8 | 40 | 4.8 x 43 |
8 x 45 | 8 | 45 | 4.8 x 48 |
8 x 60 | 8 | 60 | 4.8 x 63 |
8 x 80 | 8 | 80 | 4.8 x 83 |
8 x 100 | 8 | 100 | 4.8 x 103 |
8 x 120 | 8 | 120 | 4.8 x 123 |
8 x 135 | 8 | 135 | 4.8 x 138 |
8 x 140 | 8 | 140 | 4.8 x 143 |
8 x 160 | 8 | 160 | 4.8 x 163 |
10 x 80 | 10 | 80 | 5.8 x 83 |
10 x 100 | 10 | 100 | 5.8 x 103 |
10 x 120 | 10 | 120 | 5.8 x 123 |
10 x 135 | 10 | 135 | 5.8 x 138 |
10 x 140 | 10 | 140 | 5.8 x 143 |
10 x 160 | 10 | 160 | 5.8 x 163 |
4. Production Features and Benifits:
5. Install Guide:
1.Drill a hole of required diameter.
2.Insert FX plug into hole through
fixture.
3.Hammer the nail into the plastic sleeve
until fixing is secure and flush with the fixture.
6. More pictures:
NYLON HAMMER NAIL ANCHOR, NYLON PLUG WITH NAIL SCREWS