Active Member
|
[China]
Contact name:Cathy
Shenzhen XUWEN Technology Co. ,LTD |
|
|
Specification:
Fast Cleaning Time: 2 minutes
Strong Cleaning Time: 5 minutes (Once a week)
Ultrasonic Frequency:46kHz
Tank Capacity: 4ml
Input Voltage: AC 100V-240V 50/60Hz
Output Voltage/ Current: 12V 1A
Ultrasonic power: 7W(max)
Unit size: 98*72*48mm (3.86*2.83*1.89inch)
Tank size: 38*20*10mm (1.49*0.79*0.39inch)
Operating Instructions:
Tips: For the 1st time cleaning, it is recommended to use 5 minutes
to strengthen the cleaning.
If you want to clean it again, change the care solution and restart
the cleaning. Generally, multiple times of cleaning it is not
recommended.
1. Wash your hands firstly, then wash the basket and liner with
warm water or pure water.
2. Put the basket in the cleaning machine, and fill the contact
lens care solution (physiological saline or purified water) into
the upper edge of the stainless steel tank of the cleaning machine.
Don't fill to be too full.
3. Use the tweezer to place the left lens on the L cleaning basket,
and use the tweezer to place the right lens on another.
4. Close the cover, insert one end of the AC power adapter plug
into the cleaning machine, and the other end into the power outlet.
Lenses are intensively cleaned once a week.
Turn on the cleaning button, and it will stop automatically after 2
minutes of cleaning.
FAQ
Q1. How do I get the best ultrasonic cleaning?
There are many considerations important to ultrasonic cleaning. Optimizing these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner.
Q2. Can ultrasonic cleaning damage my parts?
With certain cautions, ultrasonic cleaning is considered safe for most parts. While the effects of thousands of implosions per second is very powerful, the cleaning process is safe since the energy is localized at the microscopic level. The most important cautionary consideration is the choice of cleaning solution. Potentially adverse effects of the detergent on the material being cleaned will be enhanced by the ultrasonic.
Q3. Why is a special solution required for cleaning?
Soils adhere to the parts... if they didn't, the soil would just fall off the parts! The purpose of the solution is to break the bond between parts and their soils. Water alone has no cleaning properties. The primary purpose of the ultrasonic activity (cavitation) is to assist the solution in doing its job. An ultrasonic cleaning solution contains various ingredients designed to optimize the ultrasonic cleaning process. For example, increased cavitation levels result from reduced fluid surface tension. An ultrasonic solution will contain a good wetting agent or surfactant.
