Spec Spcc Dc01 High Carbon Steel Cold Rolled Strip Coil 1 Buyer
Standard | JIS G3141,DIN1623,EN10130 |
Material | SPCC, SPCD SPCE,Q195,DC01,DC02,DC03,DC04,ST12 |
Thickness | 0.13-3 mm |
Width | 20-1500 mm,Normal width is 914/1000/1219/1250/1500 mm |
Finish | General, bright, dull and mirror finish, oiled or non-oiled |
Coil ID | 508 mm/610 mm |
Coil weight | 3-12 tons |
Packaging | Export standard packing or according to customers' requirement. |
Certificate | ISO9001:2008,SGS |
Shipment | Within 10-15 workdays,25-30 days when the quantity beyond 1000
tons. |
Product Introduction
Cold rolled steel is produced by cold rolling. Cold rolling is a
steel plate that further thins the No.1 steel plate to a target
thickness at room temperature. Compared with hot-rolled steel
sheet, cold-rolled steel sheet is more precise in thickness, smooth
and beautiful in surface, and has a variety of superior mechanical
properties, especially in processing performance.It is mainly used
in construction, light industry, automobile, agriculture, animal
husbandry, fishery and commerce. Among them, the construction
industry is mainly used to manufacture anti-corrosion industrial
and civil building roof panels, roof grilles, etc.The light
industry uses them to make household appliances shell, civil
chimneys, kitchen appliances, etc. The automotive industry is
mainly used to manufacture corrosion-resistant parts of cars, etc.
Agriculture, animal husbandry and fisheries are mainly used for
food storage and transportation, meat and aquatic products freezing
processing equipment, and commerce is mainly used as material
storage. Transportation, packaging, etc.
Grade | C | Mn | P | S | Alta |
DC01, SPCC | ≤0.12 | ≤0.60 | ≤0.045 | ≤0.045 | ≥0.020 |
DC02, SPCD | ≤0.10 | ≤0.45 | ≤0.035 | ≤0.035 | ≥0.020 |
DC03, SPCE | ≤0.08 | ≤0.40 | ≤0.030 | ≤0.030 | ≥0.020 |
DC04, SPCF | ≤0.06 | ≤0.35 | ≤0.025 | ≤0.025 | ≥0.015 |
Grade | RCL(Mpa) | RM(MPa) | A80mm(%) | R90 | N90 |
DC01 | 140~280 | 270~410 | ≥28 | | |
DC02 | 140~240 | 270~370 | ≥34 | ≥1.4 | |
DC03 | 120~210 | 270~350 | ≥38 | ≥1.8 | ≥0.18 |
DC04 | 120~180 | 270~330 | ≥40 | ≥2.0 | ≥0.20 |
SPCC | 130~300 | 270~410 | | | |
SPCD | 120~240 | 270~370 | | ≥1.3 | |
SPCE | 120~210 | 270~350 | | ≥1.8 | ≥0.18 |
Product Advantages
1.The cold-rolled coil products are accurate in size, uniform in
thickness, and the thickness difference of the coils generally does
not exceed 0.01-0.03 mm or less, which can meet the requirements of
high-precision tolerances.
2.It is possible to obtain extremely thin strips that cannot be
produced by hot rolling (up to 0.001 mm or less).
3.The surface quality of cold-rolled products is superior, there
are no defects such as pitting, hot-pressed iron oxide, etc.,which
are often found in hot-rolled coils, and coils of different surface
roughness (glossy or hemp) can be produced according to user
requirements. Rough surface, etc., to facilitate the processing of
the next process.
4.The cold rolled plate has a good mechanical properties and
process properties (such as higher strength, lower yield limit,
good deep drawability, etc.).
5.High-speed rolling and full-continuous rolling can be realized
with high productivity.
Related Products
Q1. How long can make delivery?
A1: For stock products,will make shipments in 2-5 days after
receiving deposit or receiving T/T; for products need new production for common materials,usually make
shipments in 2-15 days; for products need new special and rare materials,usually need 7-15
days to make shipment.
Q2. Can you provide the samples?
A2:Samples can be provided with samples' charge and courier fee by
the buyer's side.
Q3. What's your payment terms?
A3: Down payments 30%TT and balance 70% TT or L/C.
Q4. Can you accept customize?
A4: Yes. It can be customized as per the customers' request.
Q5. How to ensure the quality?
A5:Mill Test Certificate is supplied with shipment.
If needed, a Third Party Inspection is acceptable or SGS.
