Gi/Sgcc Dx51D Zinc Cold Rolled Coil/Hot Dipped Galvanized Steel
Coil/Sheet/Plate/Strip Gi
Galvanized steel coil is the reaction of molten metal with an iron substrate to produce
an alloy layer, thereby combining the substrate and the plating
layer. Hot-dip galvanizing is to pickle iron and steel parts first.
In order to remove iron oxide on the surface of iron and steel
parts, after pickling, it is cleaned in an ammonium chloride or
zinc chloride aqueous solution or a mixed solution of ammonium
chloride and zinc chloride.And then sent to the hot-dip plating
bath. Hot-dip galvanizing has the advantages of uniform coating,
strong adhesion and long service life.
Product name | Galvanized steel coil/Galvalume steel coil |
Thickness | 0.12mm-1.2mm |
Width | 600mm-1500mm,762mm,914mm,1000mm,1200mm,1219mm,1250mm |
Zinc coating | 40g,60g, 80g, 90,100g, 120g, 140g,180g, 200g, 250g, 275g and so on |
Standard | ASTM, AISI, DIN, GB |
Material | SGCC,DC51D,DX51D,DX52D,SGCD,Q195,Q235,SGHC,DX54D, S350GD, S450GD |
Spangle | Zero spangle,regular spangle or normal spangle |
surface treatment | Hot-galvanized and electro-galvanized |
Packing | Export standard. |
Payment | T/T, L/C |
Min order | 1 ton |
Product Introduction
Hot-dip galvanizing is the reaction of molten metal with an iron
substrate to produce an alloy layer, thereby combining the
substrate and the plating layer. Hot-dip galvanizing is to pickle
iron and steel parts first. In order to remove iron oxide on the
surface of iron and steel parts, after pickling, it is cleaned in
an ammonium chloride or zinc chloride aqueous solution or a mixed
solution of ammonium chloride and zinc chloride.And then sent to
the hot-dip plating bath. Hot-dip galvanizing has the advantages of
uniform coating, strong adhesion and long service life.
Our packaging is additionally strengthened and can withstand the
conditions of maritime transport and then resist to more severe
stresses. Product quality is always ensured.
Related Products
Q1. How long can make delivery?
A1: For stock products,will make shipments in 2-5 days after
receiving deposit or receiving T/T; for products need new production for common materials,usually make
shipments in 2-15 days; for products need new special and rare materials,usually need 7-15
days to make shipment.
Q2. Can you provide the samples?
A2:Samples can be provided with samples' charge and courier fee by
the buyer's side.
Q3. What's your payment terms?
A3: Down payments 30%TT and balance 70% TT or L/C.
Q4. Can you accept customize?
A4: Yes. It can be customized as per the customers' request.
Q5. How to ensure the quality?
A5:Mill Test Certificate is supplied with shipment.
If needed, a Third Party Inspection is acceptable or SGS.