|
[China]
Trade Verify
Address: G16, 66 Chunhui Middle Road, Xishan Economic Development Zone, Wuxi city, China
Contact name:Julie
Wuxi Laiyuan Special Steel Co., Ltd. |
|
Verified Suppliers
|
|
|
SS430 304 316 201 Stainless Steel Plate Sheet No.1 2B BA 4K 8K Mirror Finish 6000mm
430 is a low-carbon chromium ferritic stainless steel. This steel has good corrosion resistance in mildly corrosive environments and good resistance to oxidation at elevated temperatures. In the annealed condition the steel is ductile, does not harden excessively during cold work and can be formed using a large variety of roll forming or mild stretch- bending operations.
430 has limited weldability and should not be used in the as-welded condition for dynamic or impact loaded structures. Being a ferritic material, 430 has the potential to suffer brittle fracture at sub-zero temperatures. It should not be used in cryogenic applications.
Specification
| Use: | Applications where mildly corrosive conditions occur with mild temperatures. Sinks, wash troughs, domestic, kitchen and cafeteria equipment, etc |
| International Specs: | S43000 EN 1.4016 |
| Material: | Ferritic stainless steel |
| Dimensions / Sizes Available: | |
| Gauge Range: | 0.4 – 2.0mm |
| Material Size: | 1000 x 2000, 1250 x 2500 |
| Material Finishes: | BA, 2B, No4, Scotch brite |
| Special Features: | A simple corrosion and heat resistant grade. Mildly corrosive environments with heat resistance up to 759°C |
| Information: | Readily fabricated by means of cold forming. i.e. bending and dep drawing |
| Note: | Non-standard sizes available on request |
Chemical composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 430 | min. max. | - 0.12 | - 1 | - 1 | - 0.04 | - 0.03 | 16.0 18.0 | - | -0.75 | - |
| 430F | min. max. | - 0.12 | - 1.25 | - 1 | - 0.06 | 0.15 - | 16.0 18.0 | - | - | - |
Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 430 | 450 | 205 | 22 | 89 | 183 |
| 430F | 552 typical | 379 typical | 25 typical | - | |
Physical Properties
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (mm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nW.m) | |||
|---|---|---|---|---|---|---|---|---|---|
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
| 430 | 7750 | 200 | 10.4 | 11.0 | 11.4 | 23.9 | 26.0 | 460 | 600 |
| 430F | 7750 | 200 | 10.4 | 11.0 | 11.4 | 26.1 | |||
Possible Alternative Grades
| Grade | Reason it may be chosen instead of 430 |
|---|---|
| 430F | Higher machinability than 430 is needed in bar product, and reduced corrosion resistance is acceptable. |
| 434 | Better pitting resistance is required |
| 304 | Slightly higher corrosion resistance is needed, together with greatly improved ability to be welded and cold formed |
| 316 | Much better corrosion resistance is needed, together with greatly improved ability to be welded and cold formed |
| 3CR12 | A lower corrosion resistance is acceptable in a cost-critical application |
Packing
Why Choose Us?
1. who are we?
We are based in Wuxi, China, sell to Domestic Market and Abroad
Market. There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final
Inspection before shipment;
3.what can you buy from us?
stainless steel plate,stainless steel coil,stainless steel
sheet,stainless steel pipe and tube,sainless steel bar and other
metal.
4. why should you buy from us not from other suppliers?
Runs perennial exports of quality assured steel mills ,including
Shanxi TISCO, Baosteel, Shanghai Krupp, Ningbo Baoxin, Guangzhou
Lianzhong, Zhangjiagang Pohang, Qingdao Pohang, Sweden
AvestaPolarit, Finland OUTKUMPU, Spain Acerinox, South Africa
Columbus
