|
[China]
Trade Verify
Address: G16, 66 Chunhui Middle Road, Xishan Economic Development Zone, Wuxi city, China
Contact name:Julie
Wuxi Laiyuan Special Steel Co., Ltd. |
|
Verified Suppliers
|
|
|
C17200 4m Pancake Coil Copper Pipe 15mm Coiled Arc Welding
C17200 Beryllium Copper (AMS 4535) is the most specified copper beryllium and is available at Morgan Bronze in both Solution and Precipitation Heat Treated tubing as well as Solution Heat Treated Rod and Bar.
C17200 Beryllium Copper (AMS 4535) is the most specified copper beryllium and is available at Morgan Bronze in both Solution and Precipitation Heat Treated tubing as well as Solution Heat Treated Rod and Bar. In its age hardened condition C17200 attains the highest strength and hardness of any commercial copper based alloy. The ultimate tensile strength can exceed 200 ksi and the hardness approaches Rockwell C45. This alloy is used in bearings and pivoting members for aircraft landing gear, bushings and washers for tri-cone drilling bits, pressure housings for magnetometers and other instruments, as well as resistance welding applications.
Other terms for this alloy are: Copper Beryllium Bar; ASTM B 643 Alloy 17200; Copper Beryllium Tube; AMS 4650; C 17200; AMS 4535; Alloy 25; SAE J463; ASTM B 196 Alloy 17200; CuBe2; BeCu
Notice: The weights listed are the best estimates of the actual weights we will ship. They are a combination of the calculated theoretical weights and an average of actual weights. Our weights are conservative to the heavier side but there may be slight variations in weight from bar to bar.
The Physical, Fabrication and Thermal Properties shown here represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes.
Specification
| AMS 4535 – Tubing | AMS 4650 – Rod & Bar |
| ASTM B 643 | ASTM B 196 | AMS 4533 |
| Cu* | Ni + Co | Ni + Co + Fe | Be | Al | Si |
|---|---|---|---|---|---|
| Remainder | 0.20 min. | 0.6 max. | 1.80 – 2.00 | 0.20 max. | 0.20 max. |
Sum of all named elements = 99.5%
| Tubing – Solution & Precipitation Heat Treated TF00 (formerly AT) | English | Metric |
|---|---|---|
| Tensile Strength, min. | 161 ksi | 1110 MPa |
| Yield Strength, min. | 130 ksi | 896 MPa |
| Elongation in 4D, min | 3% | 3% |
| Rod & Bar – Solution Heat Treated TB00 (formerly A) | ||
| Tensile, maximum | 85 ksi | 586 MPa |
| Elongation | 35% | 35% |
| Rod & Bar – Solution & Precipitation Heat Treated | ||
| Tensile Strength, min. | 165 ksi | 1138 MPa |
| Yield Strength, min. | 140 ksi | 965 MPa |
| Elongation | 3% | 3% |
| English | Metric | |
|---|---|---|
| Melting Point – Liquidus | 1800° F | 982° C |
| Melting Point – Solidus | 1590° F | 866° C |
| Density | 0.290 lb/in³ at 68° F | 8.25 gm/cm³ @ 20° C |
| Specific Gravity | 8.260 | 8.26 |
| Electrical Resistivity (Annealed) | 46.2 ohms-cmil/ft @ 68° F | 7.68 microhm-cm @ 20° C |
| Electrical Conductivity* | 22 %IACS @ 68° F | 0.12 MegaSiemens/cm @ 20° C |
| Thermal Conductivity | 62 Btu · ft/(hr · ft² · °F) @ 68° F | 107.3 W/m · °K @ 20° C |
| Coefficient of Thermal Expansion | 9.90 · 10-6 per °F (68-572° F) | 17.8 · 10-6 per °C (20-300° C) |
| Specific Heat Capacity | 0.10 Btu/lb/°F @ 68°F | 419.0 J/kg · °K @ 293° K |
| Modulus of Elasticity in Tension | 18,500 ksi | 128,000 MPa |
| Soldering | Good | Capacity for Being Cold Worked | Good |
|---|---|---|---|
| Brazing | Good | Capacity for Being Hot Formed | Excellent |
| Oxyacetylene Welding | Not Recommended | Hot Forgeability Rating (Forging Brass = 100) | 40 |
| Gas Shielded Arc Welding | Good | ||
| Coated Metal Arc Welding | Good | Hot Working Temperature | 1200-1500° F or 649-816° C |
| Resistance Welding – Spot | Good | Annealing Temperature | 1425-1475° F or 775-802° C |
| Resistance Welding – Seam | Fair | ||
| Resistance Welding – Butt | Fair | ||
We have huge experience, expertise in Copper Pipe and the best dedicated team to deliver best quality products delivered as well as services at the most affordable prices for Copper Pipe . We are looking ourselves as good business partners for customers and are looking forward to establish long term professional relationship. With our world class manufacturing facilities to Copper Pipe .
we are able to deliver on time for all grades of Copper Pipe . Our stock house always has storage capacity for keeping lots of order from our clients. We make sure that the packaging of ordered materials is done in the best way.
Although lots of options are available in the market, we still stand apart in the market in the field of manufacturing, packaging and export of our products. What really makes us different from others is our commitment to quality. With a vast experience of over four decades in manufacturing of pipes and tubes, we have great expertise and technical edge for the manufacture.
