Active Member
|
[China]
Address: No.94 Yongning Western Rd.,Longwan District ,Wenzhou City,Zhejiang province,China
Contact name:Susanchen
wenzhoushi chengyu steel co.,ltd |
|
|
Quick Details
Standard:JIS,AISI,ASTM,GB,DIN,EN,GOST
Type:Welded
Grade:201/304/304L/304LN/304H/316Ti/316L/316H/321/321H/904L/310S/347 etc
Size:OD6mm-1024mm WT0.5mm-68mm LENGTH 50mm-12000mm
Application:Pipe and Tubes for petrochemical industry,Pharmaceutical industry,Food industry,Aviation and aerospace industry,Architectural decoration industryEtc
Surface Finish:Brush polish,Hairline,160grit,Mirror,Bright,Etc
Test:Hardness Test,Hydrostatic Test,Ultrasonic Test,Eddy Current Test,Dimensional Checking,Chemical Analysis Etc
Inspection:100%
Price Term:FOB,CFR,CIF or as negotiation
Such below defects not allowed:
1. Internal surface defects
Features: Straight or spiral or semi-helical serrated defects appear on the inner surface of the steel pipe.
Causes:
1) Tube billet: loose center and segregation;Serious residual shrinkage cavity;Non-metallic inclusions exceed standard.
2) Uneven heating, too high or too low temperature and too long heating time of tube billet.
3) Perforation area: severe wear on the top;Punching machine parameters are not adjusted properly;Perforated roll aging, etc.Inspection: the inner surface of the steel pipe is not allowed to have an inner fold. The inner fold of the pipe end should be polished or re-cut. The actual wall thickness of the polished place should not be less than the minimum value required by the standard.Through the length of the internal fold to reject.
2. Internal scarringCharacteristics: the inner surface of the steel tube shows spots and scars, generally not rooting easy to peel off.
| Name | 304 316 316L welded large diameter stainless steel pipe for industry | |||
| Items | Round tubes ,welded | |||
| Standard | ASTM ,GB,DIN AISI | |||
| Material Grade | 316L:Ni 10%, Cr 16% | |||
| 304L: Ni 8%, Cr 18% | ||||
| 304: Ni 8%, Cr 18% | ||||
| Outer Diameter | Round pipe9.5mm--813mm | |||
| square | 12.7x12.7--200X200mm | |||
| rectangular | 20X40--150X200mm | |||
| Thickness | 0.8mm - 34mm | |||
| Length | 5.8m,6m, or as customers' request | |||
| Tolerance | a) Outer Diameter: +/- 0.2mm | |||
| b) Thickness: +/- 0.02mm | ||||
| c) Length: +/- 5mm | ||||
| Surface | annealing,pickling | |||
| sandblasting | ||||
| Application | industry,exhausting,water | |||
| Test | Squash test, extended test, water pressure test,heat treatment, NDT | |||
| Chemical Composition of Material | Material | 304L | 316L | 304 |
| C | ≤0.035 | ≤0.035 | ≤0.08 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | ≤2.00 | ≤2.00 | ≤2.00 | |
| P | ≤0.045 | ≤0.045 | ≤0.045 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 18-20 | 16-18 | 18-20 | |
| N | 8-12.0 | 10-14 | 8-10.5 | |
| Mechanical Property | Material Item | 304L | 316L | 304 |
| Tensile Strength | ≥515 | ≥515 | ≥515 | |
| Yield Strength | ≥205 | ≥205 | ≥205 | |
| Extension | ≥35% | ≥35% | ≥35% | |
| Hardness (HV) | N/M | N/M | N/M | |
| ASTM Chemical Composition (%,max) | |||||||||
| Grade | C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Ni ≤ | Cr ≤ | Mo | Others |
| 304 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 8.00-11.00 | 18.00-20.00 | ||
| 304H | 0.04-0.1 | 0.75 | 2 | 0.04 | 0.03 | 8.00-11.00 | 18.00-20.00 | ||
| 304L | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 8.00-13.00 | 18.00-20.00 | ||
| 304N | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 8.00-11.00 | 18.00-20.00 | N:0.1-0.16 | |
| 304LN | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 8.00-11.00 | 18.00-20.00 | N:0.1-0.16 | |
| 309 | 0.15 | 0.75 | 2 | 0.04 | 0.03 | 12.00-15.00 | 22.00-24.00 | ||
| 310 | 0.15 | 0.75 | 2 | 0.04 | 0.03 | 19.00-22.00 | 24.00-26.00 | ||
| 316 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 11.00-14.00 | 16.00-18.00 | 2.00-3.00 | |
| 316H | 0.04-0.1 | 0.75 | 2 | 0.04 | 0.03 | 11.00-14.00 | 16.00-18.00 | 2.00-3.00 | |
| 316L | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 10.00-15.00 | 16.00-18.00 | 2.00-3.00 | |
| 316N | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 11.00-14.00 | 16.00-18.00 | 2.00-3.00 | N:0.1-0.16 |
| 316LN | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 10.00-15.00 | 16.00-18.00 | 2.00-3.00 | N:0.1-0.16 |
| 317 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 11.00-14.00 | 18.00-20.00 | 3.00-4.00 | |
| 321 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 9.00-13.00 | 17.00-20.00 | Ti:5xC%-0.70B | |
| 321H | 0.04-0.1 | 0.75 | 2 | 0.04 | 0.03 | 9.00-13.00 | 17.00-20.00 | Ti:4xC%-0.6 | |
| 347 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 9.00-13.00 | 17.00-20.00 | Nb+Ta:10xC%-1.00 | |
| 347H | 0.04-0.1 | 0.75 | 2 | 0.04 | 0.03 | 9.00-13.00 | 17.00-20.00 | Nb+Ta:8xC%-1.00 | |
| 329 | 0.089 | 0.75 | 2 | 0.04 | 0.03 | 2.50-5.00 | 23.00-28.00 | 1.00-2.00 | |
| 316Ti | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 11.00-14.00 | 16.00-18.00 | 2.00-3.00 | Ti:5xC%-0.75 |
| S31803 | 0.03 | 1.00 | 2 | 0.02 | 0.02 | 4.5-6.5 | 21.00-23.00 | 2.50-3.50 | N:0.08-0.2 |
| S32750 | 0.03 | 0.80 | 1.2 | 0.03 | 0.015 | 6.0-8.0 | 24.00-26.00 | 3.00-5.00 | N:0.24-0.32 |
Q1: How do u guarantee the pipes quality?
A1:Test all the incoming raw material,and full monitoring of production,When pipes finished ,inspect all the pipes if quality good then ship out.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.
Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70% before shipment.
Q5: How long is your production lead time?
A5:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q6: When can I get the quotation ?
A6: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
