|
[China]
Trade Verify
Address: No 999,Airport Road,wenzhou industry park,zhejiang china
Contact name:Bain
WENZHOU ZHEHENG STEEL INDUSTRY CO;LTD |
|
Verified Suppliers
|
|
|
Astm A182 304 / 304L 316 / 316L stainless steel blind flange (BL)flanges ASME B16.5
"zheheng steel" is a professional manufacturer of stainless steel stainless steel flanges and various special flanges. The company is also good at the production of mechanical parts of various materials.
blind flange is also called blind plate, and its proper name is flange cover. It is a flange without holes in the middle
for sealing the pipe plug. Ansi asme b16.5 a105 flange have many types of sealing surface, such as plane, convex
, concave and convex, tenon and groove surface, and ring connection surface.
Production Range:
| Stainless Steel | ASTM A182, F304 / 304L, F316 / 316L,A182F317/317L,A182F310,F321,F347,316Ti | |
| Alloy Steel | ASTM A182 A182 F12,F11,F22,F5,F9,F91,F51,F53,F55,F60,F44,F304H,F316H,F317H,F321H,F347H,INCONEL 600,625,825,etc. | |
| Standard | ANSI B16.5 | Class 150 Flanges-Class 2500 Flanges |
| DIN | 6Bar 10Bar 16Bar 25Bar 40Bar 63Bar | |
| JIS | 5K Flanges-30K Flanges | |
| EN1092-1 | 6Bar 10Bar 16Bar 25Bar 40Bar 63Bar 100Bar | |
| Type | 1. Plate Flange 2. Flat Flange 3. Slip on Flange 4. Welding Neck Flange 5.Long Welding Neck Flange 6. Blind Flange 7. Socket Welding Flange 8. Thread Flange 9. Screwed Flange 10. Lap Joint Flange. etc. | |
| Connection Type | Raised Face, Flat Face, Ring Type Joint, Lap-Joint Face, Large Male-Female, Small Male-Female, Large Tongue, Groove, Small-Tongue, Groove, etc | |
| Size | 1/2"-100",SCH5S-SCH160S,XS,XXS,STD | |
| Heat Treatment | Normalizing, Annealing, Quenching Tempering | |
what is blind flange
The formal name of blind flange (blind disk) is Flange cover, and
some are also called blind flange or pipe plug. It is a flange
without a hole in the middle, which is used to block the pipe
mouth. The function is the same as the head and tube cap, except
that the blind plate seal is a detachable sealing device, and the
head seal is not ready to be opened again.
The parts that connect the pipe to the pipe are connected to the pipe end. There are holes in the flange, and the bolts tightly connect the two flanges. The flanges are sealed with gaskets. Flange is a disc-shaped part, the most common in pipeline engineering, flanges are used in pairs.
Flange is divided into threaded connection (screw connection) flange, welding flange and clip flange. Flanges are used in pairs, low-pressure pipes can use wire flanges, welding flanges for pressures above 4 kg. Add a gasket between the two flanges, and then tighten with bolts.
Flange application:
Because the flange has good comprehensive performance, it is widely
used in chemical engineering, construction, water supply, drainage,
petroleum, light and heavy industry, freezing, sanitation,
plumbing, firefighting, power, aerospace, shipbuilding and other
basic projects.
Application of blind flange:
During the initial start-up preparation phase, when the strength test or tightness test of the pipeline cannot be performed simultaneously with the connected equipment (such as turbine, compressor, gasifier, reactor, etc.), the equipment and pipeline Set a blind plate at the connection.
Various process material pipes connected to the boundary area outside the boundary area, when the device is stopped, if the pipeline is still in operation, set a blind plate at the cut-off valve.
