Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
DIN EN X8CrMnNi18-8-3 1.4376 Stainless Steel Flat Bar X8CrMnNi18-8-3 Flat Bar 1.4376 Bar
Description
Our company provides DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar.
All of DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /T 4162 /EN 10228-3/SEP 1923 /GB.
Products Details
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
| Chemical Composition (weight%): | C (％): ≤ 0.10 |
| Si (％): ≤ 1.00 | |
| Mn(％): 5.00~8.00 | |
| P(％): ≤ 0.045 | |
| S (％): ≤0.015 | |
| Cr (％): 17.0 ~ 20.5 | |
| Mo (％): - | |
| Ni (％): 2.00 ~ 4.50 | |
| N (％): ≤0.30 | |
| Mechanical Properties Under Final Heat Treatment: | Condition: solution treatment |
| Tensile strength, σb/MPa: | |
| Yield strength, σ0.2≥/MPa: | |
| Elongation, δ5≥(％): | |
| Reduction of area, ψ≥(％): | |
| Impact strenght, Akv≥/J: | |
| Hardness HBS30: |
Applications:
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
Mechanical parts used in the condition of corrosion resistance,Pressure vessel,Bolt and nut,Chemical equipment,etc.
Equivalent Grade
DIN EN X8CrMnNi18-8-3 DIN EN 10088-1 2014
1.4376
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 T. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
Standard Seaworthy Package
based on the customer's special requirement
