Mianyang Baoheng New Material Technology Co.,Ltd |
|
ASTM 310S UNS S31008 Stainless Steel Sheets Plates ASTM 310S S31008
Sheets Plates
Description
Our company provides ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets
Plates ASTM 310S S31008 Ground Sheets Plates.
All of ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates
ASTM 310S S31008 Ground Sheets Plates conform to Military standard, nuclear power. 100% Ultrasonic
test SEP 1923 /GB/T 4162 /ASTM E2375 /SAE AMS 2154 /EN 10228-3.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Products Details
ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates
ASTM 310S S31008 Ground Sheets Plates
Chemical Composition (weight%): | C (%): ≤ 0.08 |
Si (%): ≤ 1.50 | |
Mn (%): ≤ 2.00 | |
P (%)≤: 0.045 | |
S (%)≤: 0.030 | |
Cr (%): 24.0 ~ 26.0 | |
Ni (%): 19.0 ~ 22.0 | |
Mechanical Properties Under Final Heat Treatment: | Form: Bar, plate, and forgings |
Tensile strength, σb/MPa: 515 | |
Yield strength, σ0.2/MPa: 205 | |
Elongation, δ(%): 40.0 | |
Reduction of area, ф(%): - | |
Hardness | HRB: 95 | |
Hardness (HBW): 217 | |
Cold bending property: N |
Applications:
ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates
ASTM 310S S31008 Ground Sheets Plates
Pressure vessel,
Chemical equipment,
etc
ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates
ASTM 310S S31008 Ground Sheets Plates
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates
ASTM 310S S31008 Ground Sheets Plates and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces,bending, the appearance of both ends, set
length, outer diameter and Wall thickness will be checked one by
one.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1000KG.If you want to place an order as the
start of our cooperation, we can accept smaller quantities at the
first time. Of course, after the start, We will have more stable
and long-term cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
FedEx/DHL/UPS accounts can be used for sampling, and the transportation cost is borne by you.
ASTM 310S UNS S31008 Shot blasted Stainless Steel Sheets Plates ASTM 310S S31008 Ground Sheets Plates