Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
X38CrMoV 5-1 1.2343 Structural Steel Flat Bar UNS T20811 H11 Sheet Steel
Product Information
1.2343 hot work tool steel is designated as a group H steel according to the AISI classification system. Air hardening is possible in sections up to 150mm thick. Due to the balanced alloy content, these steels undergo minimal deformation during hardening. Tools made of chromium hot work steels can be cooled with water without damage due to the low carbon and alloy content of these steels.
Size Range
Round bar / Wire rod (Diameter): 5.0 mm to 800 mm
Square bar / Flat bar: 3.0 mm to 500 mm
Forging piece: Stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Heavy/middle plate via hot rolled: T5 - 1000 mm X W10 - 1000 mm X L1000-12000 mm
Sheet steel via cold rolled: T0.8 - 10 mm X W5 - 1000 mm X L300 - 1000 mm
Steel strip via cold rolled: T0.1 - 10 mm X W10 - 1000 mm X L (or in coil form)
Length: Fixed length or random length or based on the customer's special requirement.
Chemical Composition and standard
X38CrMoV 5-1/1.2343
| UNS T20811/AISI H11 | JIS SKD6 |
| DIN EN ISO 4957-2018 | ASTM A681-2008(R2015) | JIS G 4404-2015 |
Mo(%): 1.1~1.5 V(%): 0.3~0.5
| C(％): 0.33~0.43 Mo(%): 1.1~1.6 V(%): 0.3~0.6 Ni+Cu(%): ≤0.75 | C(％): 0.32~0.42 Mo(%): 1.0~1.5 V(%): 0.3~0.5 |
X38CrMoV 5-1/1.2343 Mechanical Properties
Hardness after annealed: ≤229
Hardness after +QT: HR ≥48
Applications
1.2343 hot work tool steel is widely used in the manufacture of hot punches, die casting dies, forging dies, hot shear blades, hot fixture dies and extrusion tools
Contact us
If you are interested in our products or have any questions, please
contact our team of engineers at
sales@ss-bars.com
