|
[China]
Trade Verify
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Contact name:Kathy Wong
Wuhan Spico Machinery & Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
| Rated Flow | 1500 GPM |
| Rated Head | 91m |
| Pump : NM Fire (UL/FM ) | SCF 200-150-300 |
| Casing | Ductile Cast Iron |
| Impeller | SS304 |
| Shaft | AISI4340 |
| Shaft Sleeve | SS304 |
| Seal | Gland Packing |
| Wear Ring | Bronze |
| Bearing | SKF |
| Diesel Engine: NM FIRE (UL) | NM6-102B / 2980 rpm / 153HP |
| Control Panel: Eaton (UL/FM) | FD120-L1 |
| Motor: Techtop (UL) | TDC405TS150U2B |
| Control Panel: Eaton (UL/FM) | FD70 Series |
Advantage:
First-Class international technical standards
Horizontal Split Case (HSC) pumps are given their name due to the “split”” design of the casing, where the casing cover can be lifted off of the pump to expose the internal components. These components include the impeller, bearings, pump shaft, and so on. HSC pumps have two bearings, located on either side of the impeller, which are useful to withstand the large amount of vibration and thrust forces often caused by water turbulence in the suction piping. The pump casings are often designed to handle higher working pressures, and are often heavier. The durability of the HSC design allows the pump to be used for very large water flows – often in excess of 5000 GPM. It should be noted that an HSC pump is not always mounted horizontally, it is possible to have the same durability design features and have the pump designed to be mounted vertically.
