|
[China]
Trade Verify
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Contact name:Kathy Wong
Wuhan Spico Machinery & Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
NFPA20 Standard Electric Motor Driven Fire Pump Set , Ul Fm Pump For Fire Fighting Use
Horizontal split case pumps are the most common type of fire pump. These pumps are specifically designed and tested for fire service applications where reliability of performance is of vital importance.
Split case pumps are characterized by: • Easy access to all working parts; • Rugged construction; • Liberal water passages; and • Efficient operation. Split case fire pumps are specified when the source of water is located above the surface of the ground and provides a positive suction pressure to the pump at any performance point.
Single-stage or multistage pumps are available dependent upon discharge pressure requirements. Aurora split case fire pumps are built per the rigid standards of NFPA 20 and are listed by Underwriters Laboratories (UL) and approved by Factory Mutual (FM). Available in a broad range of operating pressures and flows from a minimum of 500 GPM, NM split case pumps can be driven by either an electric motor or diesel engine.
NM’s UL-Listed, FM-Approved fire pump packages also include the system controller, with a full range of options and accessories available to complete the NFPA-compliant fire pump package.
TECHTOP adopts computerized machine tools for metal parts; four cylinder oil hydraulic presses for stator stacking; vacuum high-pressure varnishing units for stator varnishing; clean-dry and auto-phosphorescing machines for motor housing, end shield, fan cover and other parts;electrostatic spraying-water screen-suspending line complexes for product surface painting.
| Before quotation,we need some basic information for selection & supply Scope : |
| 1:Parameters including head ,flow, altitude, temperature, voltage,
frequency (A deduction of 3 % from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft(305m) altitude above ft.(91.4m) engine horsepower rating as corrected to standard SAE conditions shall be made for diesel engines for every 10°F(5.6℃)above 77°F(25 ℃)ambient temperature.) |
| 2. Scope of supply |
| 3. Special requirements (Brand requirement/ technical requirements on product function…) |
| 4.Listed or Non-listed products ? |
