Active Member
|
[China]
Address: Room 805,building 7,No.67,Chaoyang Rd,Chaoyang District,Beijing,100123,China
Contact name:Simon
Beijing Nubway S & T Development Co, Ltd |
|
Advanced lipo freeze coolshape fat freezing machine for sale
Technical Parameter :
| Screen | 10.4 inch touch color screen |
| Handle screen | 2 inch |
| Vacuum | 0kpa-100kpa |
| Cooling temperature | -15—5centigrade |
| Handle size(length*width*depth)mm | 220*76*100(big),160*60*70(small) |
| Cavitation handle | 40K,0~70w/cm2 |
| RF handle | 2Mhz,bipolar,0~50J/cm2 |
| Cooling control | semiconductor+water+wind |
| Vacuum control | 6 EVM air pressure control |
| Work mode | 3 minutes heat then cooling |
| Voltage | AC220V,AC110V |
| Input power | 1000W |
| Weight | 44kg |
cavitation vacuum lipo cavitation slimming cavitation ultrasonic cavitation side effects
Cryolipolysis working principle:
The Cryolipolysis takes advantage of the fact that fat cells are more susceptible to cold compared to the surrounding tissue. A non-invasive applicator is attached to the desired area. It cools the underlying fatty tissue and simultaneously protects skin, nerves, muscles and other tissues. The cooled fat cells undergo Apoptosis (controlled cell death) and gradually deplete. This process reduces the fat layer by up to 30%.
During the process an apoptosis of the adipocytes is caused by the cold exposure, which leads to the releasing of cytokines and other inflammatory mediators. During about three months after the treatment, inflammatory cells gradually disintegrate the affected fat cells. Lipids are slowly released from the fat cells and removed by the lymphatic system for processing, which leads to a significant volume reduction of the affected area.
Clinical studies show that this process leads to a significantly measurable fat reduction in the treated area in selected customers within 1 to 3 months of treatment. 4 to 6 weeks after the first treatment, further treatment may be performed to minimize fat even more. Try it, it’s worth it!
Operate process:
1. Before beginning treatment, your area of concern will be marked to ensure proper placement and size of the applicator.
2. An antifreeze membrane (cool gel pad) is placed over the area to protect your skin from the applicator.
3: This specially designed cooling applicator uses vacuum pressure to draw tissue into the cooling panels.
4. A few minutes after application, you will feel some pressure and coolness
5. The applicator delivers precisely controlled cooling that freezes your targeted fat cells. These fat cells are safely, gradually, and naturally eliminated from your body.
6. The treatment is comfortable, non-invasive, and there are no restrictions afterwards. This is a great time to relax or catch up on some good reading
7. After the one hour treatment, your skin will be red and raised. This is only temporary after the applicator is removed. 8: The treated area is massaged for a few minutes, and the skin goes down and returns to normal. Massage is a safe and effective way to further reduce the fat layer following a treatment.
8. The treated area is massaged for a few minutes, and the skin goes down and returns to normal. Massage is a safe and effective way to further reduce the fat layer following a treatment.
Easy operation :
1.Open machine , Choose the function Cryo ,RF or Cavitation
2.Setting the parameter according to the suggestions in chart
3.Start work and fine-tune to the best
4.Reserve the best setting for next use
How's the cooling ?
It decide the continues working time and treatment results directly . We use tri cooling system excellent cooling and continues working 12 hours more .
Scope of treatment:
1,body thinner, skin tightening
2,Fat reduction
3,Body slimming, body shaping
4,To promote and accelerate the body s metabolism
Pre and post treatment :
