|
[China]
Trade Verify
Address: 17/F, Block C, Digital Innovation Center, No. 328 Min Tang Road, Minzhi Street Longhua District Shenzhen
Contact name:Vera Wu
Shenzhen Door Intelligent Control Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Servo Motor Speed Gates Access Control Gates
Speed gate: can be compatible with IC card, ID card, barcode card, fingerprint reading card recognition device used for staff, provide civilized, orderly access methods; effectively manage the access of staff. Can be widely used in the station, wharf subway, factories, office building, hotel, clubs, intelligent community, enterprises and institution that need intelligent access management
Framework | Cold rolled sheet + baking finish (thickness 1.5mm)+10mm Acrylic Arm | ||
Dimensions | 1600*140*1000mm | ||
Arm length | 600-1100mm | ||
Dry Contact | 12V | ||
LED indicating light | One | ||
Card-reading window: | Two | ||
Rated power | 50-100W | ||
Operating temperature | -20℃ ~ +70℃, RH ≤90% | ||
Related humidity | ≥90%RH | ||
Comunication Interface | RS485,distance ≤1200m | ||
Power supply | AC 220V/110V ±10% 50/60MHZ (optional) | ||
Opening speed: | 30-450persons per minute | ||
Main Features
1. working method can be set by the buttons on the main panel
2. Anti-pinch, anti-collision. If there is block during return of
gate, motor stops working automatically. Reset again after a
default delay, the force 2Kg.
3.Anti-illegal in, anti-intrusion, auto close for reverse
direction.
4. Anti-collision, gate closes when no valid signal is given.
5. Protection functions for gate, gate open to prevent motor from
being damaged if there is outer force collision.
6. Gates can be synchronous
7.Auto-reset. If not go through in a preset time, pass right would
be cancelled automatically. (1-60s adjustable), default time is
10s.
8. One way or two way control
9. Unit can be controlled and administered by remote control
10. Led lamp indicator
Project picture:
Factory:
Packing:
Framework | Cold rolled sheet + baking finish (thickness 1.5mm)+10mm Acrylic Arm | ||
Dimensions | 1600*140*1000mm | ||
Arm length | 600-1100mm | ||
Dry Contact | 12V | ||
LED indicating light | One | ||
Card-reading window: | Two | ||
Rated power | 50-100W | ||
Operating temperature | -20℃ ~ +70℃, RH ≤90% | ||
Related humidity | ≥90%RH | ||
Comunication Interface | RS485,distance ≤1200m | ||
Power supply | AC 220V/110V ±10% 50/60MHZ (optional) | ||
Opening speed: | 30-450persons per minute | ||
Main Features
1. working method can be set by the buttons on the main panel
2. Anti-pinch, anti-collision. If there is block during return of
gate, motor stops working automatically. Reset again after a
default delay, the force 2Kg.
3.Anti-illegal in, anti-intrusion, auto close for reverse
direction.
4. Anti-collision, gate closes when no valid signal is given.
5. Protection functions for gate, gate open to prevent motor from
being damaged if there is outer force collision.
6. Gates can be synchronous
7.Auto-reset. If not go through in a preset time, pass right would
be cancelled automatically. (1-60s adjustable), default time is
10s.
8. One way or two way control
9. Unit can be controlled and administered by remote control
10. Led lamp indicator
