Active Member
|
[China]
Address: No.2, West jiuheng Road,Xingye Avenue,Chenchong village,Qiaonan street,Panyu District, Guangzhou,China
Contact name:William Jiang
Guangzhou CVR Pro-Audio Co., Ltd |
|
|
Dance Floors Sound 5 Inch Active Line Array System Dual Array Equipment
DESCRIPTION and APPLICATION
W-25 is a line array system which is made of two 5"woofers, a
1.4"titanium compression driver and high performance low distortion
compression driver with innovative horn design of wave phase
philosophy. It is a zero interfere line array with multi- speaker
combined to produce accurate directivity and maximum dynamic
impact. Wherever low frequency extension is required,a W-25 will
integrate seamlessly with W-102P line array sub-bass system in a
standard configuration. Each enclosure is equipped with rigging
system, allowing flown array to be constructed rapidly and safely.
W-25 is veryversatile and scalable for a wide range of applications in touring performance,corporate and fixed installation fields.
W-102P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-102P features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-102P and W-25.The physical dimensions of W-102P are identical to the W-25 and it's equipped with the same proprietary rigging system.It's features with two 10"inch woofers with magnet structure and suspensions engineered for maximum linear excursion.
SPECIFICATION:
| Model | W-25 & W-102P |
| Type | Line array system |
Line array sub-bass system(W-102P) | |
| Frequency Response | 90Hz-20KHz±3dB |
| 45Hz-150Hz±3dB(W-102P) | |
| Power handing | LF 160W(RMS)320W(PEAK) |
HF 60W(RMS)120W(PEAK) | |
| 400W(RMS)800W(PEAK)(W-102P) | |
| Sensitivity | LF 92dB(1W-1M) |
| HF 108dB(1W-1M) | |
| 103dB(1W-1M)(W-102P) | |
| Max-S.P.L | LF 114dB(PEAK/1M) |
| HF 126dB(PEAK/1M) | |
| 129dB(PEAK/1M)(W-102P) | |
| LF section | 2×5"(135mm) woofer |
| 35mm(1.5in)coil | |
| Components | 2×10"(260mm)woofers |
| 50mm(2in)coil(W-102P) | |
| Nominal impedance | 16 ohm |
| 4 ohm(W-102P) | |
| HF section | 1×1.4"compression driver |
| with 34mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×9°V |
| Finish | Black paint |
PACKAGE:
| Array design | Arrays of less than 3×W-25 will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | 1(+)1(-)Built in crossover |
| Rigging system | Please refer to the W-25 user |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | 80Hz-20KHz |
| 42Hz-120Hz(W-102P) | |
| Dimensions | 410×163×248mm(W×H×D) |
| 408×300×493mm(W×H×D)(W-102P) | |
| Package dimensions | 480×230×320mm/0.04cbm |
| 480×370×560mm/0.1cbm(W-102P) | |
| Enclosure | PU(W-25)/Plywood(W-102P) |
| Net weight | 7.8kg(W-25) / 23kg (W-102P) |
| Gross weight | 9kg(W-25) / 25kg (W-102P) |
