Home Companies LIYANG APEX BIOMASS EQUIPMENT CO.,LTD

Grain Bucket Elevator Inclined Belt Conveyor

Contact Us

[China]

Trade Verify

Address: No.189 Xianlu Road ,Kunlun Street ,Liyang ,Jiangsu ,China

Contact name:Apexbiomass

LIYANG APEX BIOMASS EQUIPMENT CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Grain Bucket Elevator Inclined Belt Conveyor

Country/Region	china
City & Province	jiangsu

Product Details

TDTG Large Lifting Bucket Elevator Self Clearning

Specifications

1. Feed bucket elevator with Rectangular DOUBLE CHANNEL closed case.
2. Flanged structure and bolt connection.
3. Large lifting capacity.

TDTG series bucket elevators are used to lift vertically various of granular feedstock in grain and oil, food, feedstuff industry. They are the new generation elevators designed on the basis of overseas advanced techniques.

Brife Introduction

The bucket elevator is suitable for lifting from low to high. After the supplied materials are put into the hopper through the vibrating table, the machine automatically runs continuously and transports upward. The conveying speed can be adjusted according to the conveying capacity, and the lifting height can be selected on demand. The hopper is self-designed and manufactured. PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs

Working principle

The hopper scoops up the materials from the storage below, and with the conveyor belt or chain lifting to the top, it turns down after bypassing the top wheel, and the bucket elevator dumps the materials into the receiving tank. The drive belt of bucket elevator with belt drive generally adopts rubber belt, which is installed on the lower or upper drive drum and the upper and lower change direction drum

Main technical parameter :

Main technical parameters
Machine type		TDTG	TDTG	TDTG	TDTG	TDTG	TDTG	TDTG	TDTG	TDTG
Machine type		26x15	40X19	40X23	61X29	70X33	80X47	80X51	100X47X2	110X51X2
Conveying capacity(T/H)		8~15	20~35	20~35	35~50	60~100	120~200	150~250	350~550	400~650
Bucket	Speed(m/s)	1~2	1.6~2.5	1.6~2.5	2.0~3.2	2.0~3.2	2.0~3.2	2.0~3.2	2.5~4	2.5~4
	Capacity(L)	0.62	1.26	1.31	1.59	3.9	8.5	9.46	8.5X2	9.46X2
	Distance(MM)	150~200	200	200	200	250	250	250	250	250
	Width(MM)	150	190	235	285	337	475	519	475	519
Bend width(MM)		175	220	250	350	380	500	550	1000	1200
Head drum diameter(MM)		260	400	400	610	700	800	800	1000	1140

The advantage of bucket elevator :

Bucket elevator is a conveying equipment for vertically lifting and transporting materials. It has the advantages of simple structure, low maintenance cost, high conveying efficiency, high lifting height, stable operation, wide application range and so on

(1) The driving power is small. The inflow feeding, induction unloading and large capacity hopper are densely arranged. There is almost no return and excavation during material lifting, so the invalid power is small.

(2) The lifting range is wide. This kind of hoist has few requirements on the types and characteristics of materials. It can not only lift general powdery and small granular materials, but also lift materials with greater grindability, with good sealing and less environmental pollution.

(3) Good operation reliability, advanced design principles and processing methods ensure the reliability of the whole machine, and the fault free time is more than 20000 hours. The lifting height is high The hoist runs smoothly, so it can reach a higher lifting height.

(4) The service life is long. The feeding of the hoist adopts the inflow type, and there is no need for bucket excavation. There is little extrusion and collision between materials. The machine is designed to ensure that materials are less scattered during feeding and unloading, reducing mechanical wear.