Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD |
|
Double Frequency 0-180W Power Adjustable Ultrasonic Cleaning Machine
Ultrasonic cleaning is based on the cavitation effect caused by
high frequency ultrasonic wave vibration signal in the fluid.
Microscopic bubbles are formed, and then implode violently causing
the cavitation which create an intense scrubbing action on the
surface of the item being cleaned. The bubbles are small enough to
penetrate microscopic crevices, cleaning them thoroughly and
consistently.
Ultrasonic cleaning is extremely effective at removing dirt and
grime which would normally require tedious manual cleaning by hand.
It has been used to clean a wide variety of instruments and
mechanical parts such as carburetors, returning them to almost
“like new” condition without damage to delicate parts.
What's double frequency and power adjustable ultrasonic cleaner?
Double frequency, it means fullwave(40KHz) for intensive rinse, semiwave(28KHz) for gross rinse. 0-180W power adjustable , you can set up the power you want.
Why buy ultrasonic cleaner from DeKang
1. Reply your enquiry in 10 working hours.
2. No MOQ request
3. OEM and ODM is available.
4. Professional technical support
5. High quality and competitive price
All of our ultrasonic equipment carries two certifications : CE, RoHS
We are been Manufacturers and we have factory in Shenzhen . We are happy to share our experience in cleaning with you, our customer. Just send an email or call us toll free and we will do all we can to help
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.
Specification
Model: | DK-600PS |
Tank Size: | 300*155*150mm(L*W*H) |
Overall Size: | 330*180*330 mm(L*W*H) |
Capacity: | 6.5L |
Frequency: | 28 and 40 KHz |
Ultrasonic Power: | 0-180W |
Heating Capacity: | 300W |
Timing Range : | 1-99min |
Temperature Range: | 0-80ºC |
Water Drainage: | Yes |
How to use DeKang ultrasonic cleaner ?
1. Fill water in the stainless steel tank, to a better
clean effect, you can add some cleaning solution; Plug the
power lead into grounded outlet; After power-on, the
temperature displays the actual environmental temperature, LED
displays 3 minutes (default ultrasonic time).
2.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time,
press and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
3.Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more
than one hour
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt
you and damage the machine itself.
The Delivery time
3 days after confirm the payment ,Express Including
YOUSU,UPS,DHL,FedEx,Air transportion,Sea transportation,Also you
could ask your courier to pick the goods.