Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD |
|
Mini Bath Digital Ultrasonic Cleaner 1.3L Time Seting for Bracelet
Brief introduction
Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a comprehensive new high-tech enterprise which focuses on the research&development, productction and sale of household,commercial,laboratorial,industrial high-power ultrasonic cleaner ect.Especially,we also can customize non-standard products according to customers'requirements.
We could support:
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
Product detail
As you can see from below picture,This machine is make up of seven
button which include degass,heating and timing.Basket are free ,and
you can see that the details are perfect,such as handel
,anti-slip feed ect.
Application
Industrial ultrasonic cleaner are suitable to clean irregular and
complex specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.
Plug
Havemany kind of plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK PLUGE .
Specification
Model: | DK-130D |
Tank Size(mm): | 150*140*65 |
Overall Size(mm): | 190*170*195 |
Capacity: | 1.3L |
Frequency(KHz): | 28 or 40 |
Ultrasonic Power(W): | 60 |
Heating Capacity(W): | 100 |
Timing Range(min:secs): | 1~99 |
Temperature Range(℃) | 0~80 |
Water Drainage | Yes |
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.So
you could trust us,we will do our best for you!
How to use?
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more
than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
5. Degas mode: work intermittently,i.e., 6s “ON” + 2s “OFF” working mode.
It can clean items deeply and efficiently.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.