Active Member
|
[China]
Address: 2F, Building 8, YuanLing Industrial Park, ShangWu Community, ShiYan Street, Bao'an District, Shenzhen，China
Contact name:Sandy Wang
Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD |
|
|
10 Liter Dental Laboratory Jewelry Digital Ultrasonic Cleaner
Application:
1) Jewelry: Earrings,Necklace,Rings,Bracelets and Diamonds.
2) Glasses&Timepieces: Glasses,Optical Lenses,Contact Lens
Accessories,Watch Chains and Waterproof Watches.
3) Commodities: Tattoo Guns and Tubes,Electric Shaver Heads,Razor
Blades,Dentures,Combs and Toothbrushes.
4) Stationery: Pen-heads,Printer heads,Inkjet Cartridges and Seals.
5) Metal Articles: Ancient Coins, Badges,Valves,Machine
Nozzles,Electronics Components and Mechanical
Parts,Forks,Knives,Spoons and Other Small Silverware etc.
6) Laboratory: Scientific Research, Mixing, Cell Disruption, extraction, pharmaceutical Sonochemistry
7) Others: Baby nipples,baby feeder bottles,beauty brush.
Features:
Die casting stainless steel tank
.Industrial grade integrated circuit
.0-80ºC temperature range
.1-99 minutes working time
.Degassing and degreasing function
.28KHz for gross rinse or 40KHz for intensive rinse
.Auto stand-by, sleep, and wake-up by one key-press mode
.Digital controller of high-precision and a long service-life
Specification
| Model: | DK-1000D |
| Tank Size(mm): | 300*240*150 |
| Overall Size(mm): | 330*270*330 |
| Capacity: | 10L |
| Frequency(KHz): | 28/40 |
| Ultrasonic Power(W): | 180 |
| Heating Capacity(W): | 300 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
How to use?
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
2. Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
5. Degas mode: work intermittently,i.e., 6s “ON” + 2s “OFF” working mode.
It can clean items deeply and efficiently.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.
