Applications:
Carbide rods are mainly used in drill bits, end milling cutters,
winch. It can also be used for cutting, stamping and measuring
tools. It is used in papermaking, packaging, printing, non-ferrous
metal processing. In addition. It is also widely used in machining
high speed steel cutting tools, carbide milling cutters, NAS
cutting tools, aviation cutting tools, cemented carbide bits,
milling cutter cored bits, high speed steel taperd milling cutters.
Metric milling cutters, miniature end milling cutters, hinge pilot,
electronic tools, step drills, metal cutting saws, double margin
drills, guns, angle milling cutters, carbide burrs, carbide
cutters, etc
Production process
The cemented carbide rod belongs to the cutting tool of cemented
carbide, it is suitable for different rough grinding parameters,
cutting material and non-metal material. At the same time, the
cemented carbide rod can also be used in the traditional automatic,
semi-automatic lathe and so on.
The main technological process is powder making.
→Formula according to use. →Wet grinding. →Mixing. →Crushing.
→Drying. →Sieve. →After addition of moulding agent. →Redrying.
→Sifted mixture. →Granulation. →Suppression. →Molding. →Low
pressure sintering. →Forming (blank). →External grinding (blank
does not have this process). →Test size. →Packing. →Put in a
storehouse.
Characteristics of cemented Carbide Rod
1, With high quality superfine tungsten carbide and imported cobalt
powder as raw materials.
2, using the world's advanced low-pressure sintering preparation
technology for standardized production.
3, With high strength and high hardness.
4, With excellent red hardness, good wear resistance, high elastic
modulus, high bending strength, good chemical stability (acid,
alkali, high temperature oxidation, good impact toughness, low
expansion coefficient, thermal conductivity. The characteristics of
conducting electricity are similar to those of iron and its alloys.
5, Advanced equipment: Germany imported 10 MPA low-pressure
sintering furnace sintering.
6, The unique new technology: vacuum, high temperature and high
pressure sintering. The product adopts pressure sintering in the
final stage, greatly reduces porosity, enhances the density, and
greatly improves the mechanical properties of the products.
7, Product characteristics: many grades of material, can be used
for different uses of demand; complete specifications, precise
blank size (reduce processing capacity, improve production
efficiency).
8, The service considerate response fast: to issue the order to
produce fast, the delivery is quick and on time 3 ~ 5 days.
Tool life, wear resistance, “staying on the edge”, and
outperformance are your benchmarks, we have a lot to offer tungsten
carbide rods:
| 1. un-gound, finish-ground in metric and imperial diameters; |
| 2. Carbide rods with central coolant duct; |
| 3. Carbide rods with 2 parallel coolant ducts; |
| 4. Carbide rods with helix coolant ducts; |
| 5. Carbide rods with chamfered end. |
Welcome for your inquiry!
