Active Member
|
[China]
Address: ZHONGXING EAST ROAD 208, XIKOU TOWN315502, FENGHUA CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Ricky
Ningbo Nijia Electronics Technology Co.,Ltd |
|
|
FEATURES:
1. The SCG353A047 1.5 " pulse diaphragm pulse valves are especially designed for dust collector service
applications, combining high flow, long life and extremely
fast opening and closing to provide reliable and economical
operation ,The high flow, angle type bodies in combination with the
special main diaphragm assemblies give the unique operating
features required for dust collector service applications
2. Integral compression fittings for fast, easy, secure
installation
3. Valves can be supplied according to ATEX Directive 94/9/EC for
non-electrical equipment by using suffix GD ,The components satisfy
all relevant EC directives
Specification:
| Ordering Code | Port Size | Orifice | Flow Value | Coil type | |
| G Threaded | mm | m3/h | l/min | ||
| SCG353A047 | 1 1/2" | 52 | 46 | 768 | 400425 |
| SCG353A050 | 2" | 66 | 77 | 1290 | 400425 |
| SCG353A051 | 2 1/2" | 66 | 92 | 1540 | 400425 |
| SCG353.060 | 3" | 75 | 170 | 2833 | 400425 |
Construction:
| Body | Aluminum |
| Core tube | Stainless steel |
| Core and Plugnut | Stainless steel |
| Core Spring | Stainless steel |
| Sealing & disc | CR (chloroprene) |
| Diaphragm | NBR(nitrile/buna-n) or Viton |
| Shading coil | Copper |
| Connector | DIN43650A |
| Voltage | DC: 24V, AC: 24V,48V,110V,230V |
| Working Temperature | - 20 to + 85 ℃ |
| Protection Class | IP65 |
| Coil Insulation Class | F |
| Working Pressure | 0.35-0.85Mpa |
OPTIONS:
| 1 | Sequential controller for pilot solenoid valves, Pilot boxes containing 2 to 12 pilot solenoid valves |
| 2 | Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix 'V' for identification |
| 3 | Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and national standards |
INSTAllATION:
| 1 | The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings |
| 2 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
| 3 | Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available |
| 4 | When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations |
DIMENSIONS (mm), WEIGHT (kg):
| Ordering Code | A | B | C | D | E | F | G | H | J | K | L | Weight |
| SCG353A047 | 80 | 50 | 30 | 71 | 130 | 136 | 45 | G 3/8 " | 131 | 160 | 178 | 1.4 |
| SCG353A050 | 80 | 50 | 30 | 95 | 168 | 165 | 45 | G 3/8 " | 165 | 210 | 227 | 2.9 |
| SCG353A051 | 80 | 50 | 30 | 95 | 168 | 165 | 45 | G 3/8 " | 165 | 210 | 227 | 2.6 |
| SCG353.060 | 80 | 50 | 30 | 143 | 240 | 192 | 45 | G 1/2 " | 165 | 258 | 275 | 4.1 |
Repair kit: C113827
Product show:
