Industrial Automatic Shoe Sole Cleaning Machine Installed With A 3.5 Inch Touch Screen

Intelligent Sole Cleaning Machine Automatic Industrial Vacuuming Equipment

Product Quick Detail

1. When a person pass through the machine , the brush rotates, and the adjacent two brushes rotate in opposite directions ; The foot is stepped on the brush pedal to achieve the purpose of cleaning the sole . Automatically changing water and automatically discharging dirt .

2. The cleaned shoes can be sucked dry when they are placed on a high-performance absorbent sponge.

3. Reduce the dirt, shoe prints, etc. left by the soles .Wash the soles and absorb residual moisture

4. The base material of the machine is made of special aluminum alloy profiles,which has special structural design for superior performance.

5. Apply to hotels, electronics, food, cosmetics, aerospace,bio-pharmaceuticals and other places.

6. Sole cleaning machine installation environment: Air shower, factory aisle, operating room, laboratory, hotel room, etc.

Product Features

1. The convenient disassembly of the absorbent towel makes it easy to clean and maintain.

2. The machine cable and interface of the pipeline can be installed on the left or right side of the machine , according to customer's requirements.

3. The machine is installed with a 3.5 inch touch screen , easy to set the machine parameters . (Network model of WIFI/4G option)

4. Import and export indicator lamps are installed in the four corners of the machine . The lamps are interval blinking when in standby mode . They are always on when in running mode and warning pedestrians when in dark conditions .

5. Width indicator lamps are installed on both sides of the machine ( Default luminous blue ) . They are breathing blinking when in standby mode and always on when in running mode. It blinking quickly when machine in fault and warning pedestrians when in dark conditions .

6. The base material of the machine is made of aluminum alloy , which has superior compressive performance.

7. Adjustable for each wash time . (Option)

8. The machine is installed a sensor to monitor the operation of the drive structure.

9. The suction area is installed a sensor to ensure the absorbent performance is stable.

10. Monitoring the operation of the sewage pump in real time , to ensure the safe.

11. The machine can start and clean automatically when nobody use it.

Product Conditions to Use

1.Ambient temperature: 0-40°C .

2.Supply water temperature: 0-30°C .

3.Water pressure :2-6KG/CM² .

4.The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.

5.It is strictly forbidden to move and lift the machine before draining the water inside the cleaning machine.

6. When in installation, the whole machine should be balanced force during the lifting, and no press can be applied to the surface of the machine during the lifting.

Specifications

Product Description

Sole cleaning machine is used in the export facility of the factory floor to clean the soles.

This product is mainly used in laboratories, operating rooms, pharmaceutical factories, food factories, air shower rooms, dust-free workshops.

The ultrathin body design with arbitrarily spliced and the height of the cleaning area is only 2 cm .

The sole cleaning machine adopts intelligent control, induction start,and people leave the machine to stop, so that it can achieve the purpose of extending life and saving energy.

This machine does not dive and has no dead ends when working.During the use, people do not need to stay.

The whole machine is fully intelligent with water, automatic water change, automatic sewage discharge, and accompanying washing.

The height of the water level is monitored in real time during standby and operation of the sole cleaning machine to ensure the safe use of it .

Working life: 7 years at least.

Packing: wood case

Skype: 86-19936133523

Contact person: Helen Won

Email: hrong0821@gmail.com / hrong0821@163.com