Active Member
|
[China]
Address: No.7, Aimin Road, Hourui Community, Hangcheng Street, Baoan District, Shenzhen, China
Contact name:Fred Cheng
ShenZhen URILIC ENERGY Technology Co.,Ltd |
|
|
NPower 260W - 3500W Low Frequency Power Inverter Pure Sine Wave
Inverter 12V - 48V
Description:
NPower series is a kind of pure sine wave inverter which can convert 12/24/48VDC to 220/230Vac.It is based on full digital and intelligent design, it adopts the advanced SPWM technology, voltage and current double closed-loop controlled and completely isolated inverter technology, such as to ensure the product with high quality electrical parameters, the stronger ability to resist impact load, the input surge prevention design at the same time.meet the special requirements of lithium battery surge limit, to ensure the safety and function of the inverter running and reliable. The case is designed with galvanized board,which has the advantages of high strength and corrosion resistance. This product has the characteristics of high reliability, high efficiency, simple appearance, complete protection function, easy installation and easy operation. It is suitable for AC load of household appliances,power tools, industrial equipment, electronic audio and video and solar photovoltaic power generation system, such as vehicle inverter application system, solar RV, solar household, solar yacht and solar power station.
Low Frequency Power Inverter Features:
Adoption of advanced SPWM technology, pure sine wave output
Adopt voltage and current double closed-loop control to enhance the load capacity
The input and output adopt completely isolated inverter technology with high reliability
The input adopts anti-surge design to meet the special requirements of surge limitation of the lithium battery and avoid dangerous surge current generated by connection of startup.
Low output harmonic distortion(THD≤3%)
The output adopts excellent EMC design to prevent interference of connected equipment
Output voltage 220/230VAC and frequency 50/60Hz optional
Extensive protections: input reverse polarity, input overvoltage, input low voltage, output overload and short circuit, overheating.
RS485 port can connect the communication module, realize remote start/stop inverter and monitor the running status via the APP or PC software.
Set the input low voltage and low voltage reconnect voltage via the APP or PC software
Set the inverter’s ID via the APP or PC software to monitor several inverters.
The case is designed with the galvanized board, with high strength and strong corrosion resistance
Chinese dual socket, Australia/New Zealand, European, Terminal selectable
Easy maintenance and repair
Product Details (NP-260, NP-400):
| Item | NP-260-12 | NP-260-22 | NP-400-12 | NP-400-22 |
| Output Continuous Power | 260W@25℃；260W@45℃ | 400W@25℃；350W@45℃ | ||
| Surge Power | 400W | 700W | ||
| Output Voltage | 220/230V (-8%~+3%) | 220/230V (±3%) | 220/230V (±3%) | 220/230V (±3%) |
| Output Frequency | 50/60±0.2% | |||
| Output Wave | Pure Sine Wave | |||
| Output THD | THD≤3%(Resistive load) | |||
| Load Power Factor | 0.2~1(VA≤Continuous output power) | |||
| Rated input voltage | 12V | 24V | 12V | 24V |
| Battery Input voltage range | 10.8～16V | 21.6～32V | 10.8～16V | 21.6～32V |
| output efficiency of80% rated power① | 0.81 | 0.84 | 0.81 | 0.85 |
| Max. Rated Efficiency② | 0.79 | 0.82 | 0.79 | 0.84 |
| Max. Efficiency③ | 89%(80W) | 90%(100W) | 90%(100W) | 91%(100W) |
| No-load Current | ＜0.4A | ＜0.3A | ＜0.5A | ＜0.3A |
| RS485 Com. Port | 5DC/200mA | |||
| Binding Post | Φ6mm | Φ6mm | ||
| Overall dimension | 365×212×97mm | 386×215×99mm | ||
| Mounting Dimension | 220×193mm | 230×196mm | ||
| Mounting hole size | Φ7mm | Φ7mm | ||
| Weight | 6.34kg | 6.24kg | 6.24kg | 7.86kg |
| Working Temperature | -20℃～+45℃(Full load) | |||
| Storage Temperature | -35℃~ +70℃ | |||
| Humidity | < 95%(N.C.) | |||
| Enclosure | IP20 | |||
| Altitude | < 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m) | |||
Product Details (NP-600, NP-800, NP-1000):
| Item | NP-600-12 | NP-600-22 | NP-800-12 | NP-1000-22 |
| Output Continuous Power | 600W@25℃； 500W@45℃ | 800W@25℃；800W@45℃ | 1000W@25℃；800W@45℃ | |
| Surge Power | 1000W | 1600W | 1600W | |
| Output Voltage | 220/230V (-8%~+3%) | 220/230V (±3%) | 220/230V (-8%~+3%) | 220/230V (±3%) |
| Output Frequency | 50/60±0.2% | |||
| Output Wave | Pure Sine Wave | |||
| Output THD | THD≤3%(Resistive load) | |||
| Load Power Factor | 0.2~1(VA≤Continuous output power) | |||
| Rated input voltage | 12V | 24V | 12V | 24V |
| Battery Input voltage range | 10.8～16V | 21.6～32V | 10.8～16V | 21.6～32V |
| output efficiency of80% rated power① | 0.81 | 0.85 | 0.83 | 0.85 |
| Max. Rated Efficiency② | 0.8 | 0.83 | 0.81 | 0.82 |
| Max. Efficiency③ | 89%(200W) | 92%(160W) | 92%(100W) | 92%(200W) |
| No-load Current | ＜0.6A | ＜0.4A | ＜0.6A | ＜0.4A |
| RS485 Com. Port | 5DC/200mA | |||
| Binding Post | Φ8mm | 20*3mm(Rectangle) | 20*3mm(Rectangle) | |
| Overall dimension | 428×243×121mm | 475×268×139mm | 475×268×139mm | |
| Mounting Dimension | 260×220mm | 270×245mm | 270×245mm | |
| Mounting hole size | Φ9mm | Φ9mm | Φ9mm | |
| Weight | 10.32kg | 10.08kg | 13.22kg | 12.64kg |
| Working Temperature | -20℃～+45℃(Full load) | |||
| Storage Temperature | -35℃~ +70℃ | |||
| Humidity | < 95%(N.C.) | |||
| Enclosure | IP20 | |||
| Altitude | < 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m) | |||
Product Details (NP-1200, NP-2000, NP2500):
| Item | NP-1200-12 | NP-1200-22 | NP-2000-42 | NP-2500-22 |
| Output Continuous Power | 1200W@25℃；1000W@45℃ | 2000W@25℃； 2000W@45℃ | 2500W@25℃；2500W@45℃ | |
| Surge Power | 2000W | 4000W | 5000W | |
| Output Voltage | 220/230V (-8%~+3%) | 220/230V (±3%) | 220/230VAC (±3%) | 220/230VAC (-6%~+3%) |
| Output Frequency | 50/60±0.2% | |||
| Output Wave | Pure Sine Wave | |||
| Output THD | THD≤3%(Resistive load) | |||
| Load Power Factor | 0.2~1(VA≤Continuous output power) | |||
| Rated input voltage | 12V | 24V | 48VDC | 24VDC |
| Battery Input voltage range | 10.8～16V | 21.6～32V | 43.2～64VDC | 21.6～32VDC |
| output efficiency of80% rated power① | 0.81 | 0.85 | 0.89 | 0.89 |
| Max. Rated Efficiency② | 0.78 | 0.84 | 0.87 | 0.87 |
| Max. Efficiency③ | 92%(200W) | 93%(300W) | 93%(500W) | 93%(500W) |
| No-load Current | ＜0.6A | ＜0.4A | ＜0.3A | ＜0.8A |
| RS485 Com. Port | 5DC/200mA | 5VDC/200mA (Ioslation) | 5VDC/200mA | |
| Binding Post | 20*3mm(Rectangle) | M10 | ||
| Overall dimension | 511×268×139mm | 486×313×145mm | 539×328×170mm | |
| Mounting Dimension | 300×245mm | 350×292mm | 350×307mm | |
| Mounting hole size | Φ9mm | Φ9mm | ||
| Weight | 15.64kg | 15.28kg | 20.7kg | 32.8kg |
| Working Temperature | -20℃～+45℃(Full load) | |||
| Storage Temperature | -35℃~ +70℃ | |||
| Humidity | < 95%(N.C.) | |||
| Enclosure | IP20 | |||
| Altitude | < 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m) | |||
Product Details (NP-3000, NP-3500):
| Item | NP-3000-22 | NP-3000-42 | NP-3500-42 |
| Output Continuous Power | 3000W@25℃；3000W@45℃ | 3500W@25℃； 3500W@45℃ | |
| Surge Power | 6000W | 7000W | |
| Output Voltage | 220/230VAC(-5%~+3%) | 220/230VAC(±3%) | 220/230VAC(±3%) |
| Output Frequency | 50/60±0.2% | ||
| Output Wave | Pure Sine Wave | ||
| Output THD | THD≤3%(Resistive load) | ||
| Load Power Factor | 0.2~1(VA≤Continuous output power) | ||
| Rated input voltage | 24VDC | 48VDC | 48VDC |
| Battery Input voltage range | 21.6～32VDC | 43.2～64VDC | 43.2～64VDC |
| output efficiency of80% rated power① | 0.88 | 0.9 | 0.9 |
| Max. Rated Efficiency② | 0.86 | 0.89 | 0.89 |
| Max. Efficiency③ | 94%(500W) | 94%(900W) | 93%(900W) |
| No-load Current | ＜0.8A | ＜0.5A | ＜0.5A |
| RS485 Com. Port | 5DC/200mA | 5VDC/200mA(Ioslation) | |
| Binding Post | M10 | ||
| Overall dimension | 639×393×175.5mm | 584×328×170mm | 564×353×175mm |
| Mounting Dimension | 350×372mm | 350×307mm | 350×332mm |
| Mounting hole size | Φ9mm | ||
| Weight | 36.4kg | 28.4kg | 32.2kg |
| Working Temperature | -20℃～+45℃(Full load) | ||
| Storage Temperature | -35℃~ +70℃ | ||
| Humidity | < 95%(N.C.) | ||
| Enclosure | IP20 | ||
| Altitude | < 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m) | ||
①DC input voltage israted voltage, the load power is 80% of the
continuous output power (25℃)
②DC input voltage israted voltage, the load power is as same as the
continuous output power (25℃)
③DC input voltage israted voltage, max power with different load
power.
Application Topology:
