|
[China]
Trade Verify
Contact name:John Yang
Yoha （Wuhan） New Energy Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
A+A+A+ Solar Simulator
Application:
Mainly used in automatic test and result record of solar
mono-crystalline silicon, poly-crystalline silicon solar cell
module and thin-film module.
Products Features:
1. Flash impulse continuous adjustable range 0-60ms 100ms(Customized)
2. Four-line measurement; 14-bit 4-channel high-speed synchronous acquisition card, 8000 data collecting point;
3. 10 parameters display;measured parameter display in tabulation and graphic way;
4. Irradiance automatically compensating; temperature automatically compensating;
5. Voice counts off and prompts of flash time;counting prompts of flash time
6. 24 consecutive hours of work, working life of imports Xenon lamp is 300,000 times of flash
7. Patented Design with high quality key components
8. Touch-screen control
9. Independent explosion proof control cabinet
Technical Data:
| Model | YHPT-A+A+A+ | Feature |
| Lamp Spectrum | In line with IEC60904-9:2007(A Grade) | 1. Measurable parameters: I-V curve, short circuit current, open circuit voltage, peak power, peak power point voltage, current, fixed voltage current, filling factor, conversion efficiency, light intensity and environmental temperature. 2. Automatic classification and display function. It can be automatically classified according to the fixed voltage and current, and the results of the classification can be displayed directly on the test cabinet by digital display. Easy to use in production line. 3. Solar cells are connected by four wires to ensure the current accuracy. 4. Measuring temperature and light intensity at the same time to ensure the accuracy of automatic correction of solar cell temperature and light intensity. 5. Self-tuning system with manual input compensation parameters, automatic/manual temperature compensation, automatic light intensity compensation, etc. |
| Light Intensity | 1000W/m²(700W/m²-1200W/m²) | |
| Light intensity non-uniformity | ≤±2%[AAA] | |
| Instability degree of irradiation | ≤±1%[AAA] | |
| Test results consistency | ≤±0.05%[AAA] | |
| Test error of electrical properties | ≤1% AAA | |
| Single flash time | 60ms 100ms 150ms(Optional) | |
| Effective Test Range | 2500mm×1400mm 2600*1500mm(Optional) | |
| Measuring Voltage | 0-200V(Resolution 1mV) | |
| Measuring current | 200mA-20A(Resolution 1mA) | |
| Environmental temperature | 15℃~30℃ | |
| Test Parameters | Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh | |
| power | 220V/50Hz(60Hz) |
Equipment, machine configuration:
1. Test Host(With electronic load):1 set
2. Light source(With optical system):2 Pieces
3. PC:1 set
4. High-speed data collection A/D plant:1 piece
5. Dedicated measurement software:1 set
6. Test bench:1 set
7. Standard Battery(Compensation and correction for the irradiance uniformity measurements):1 piece
8. Size:2.64*1.48*1.2m (Host)+0.86*0.61*0.95m(Spare parts)
9. G.weight:400KGS+25KGS
Key Components:
| SN | Name | Brand | Qty |
| 1 | Test Host(With electronic load) | Customized | 1 |
| 2 | High-speed data collection A/D Card | Customized | 1 |
| 3 | PLC | Siemens PLC | 1 |
| 4 | Touch-screen control | TK6070IH | 1 |
| 6 | Light source | Germany Haimam | 2 |
| 7 | Computer | Industrial computer | 1 |
Environmental requirements:
Indoor light intensity < 100cd
Indoor ambient temperature: 20 + 6 degrees
Extreme outdoor maximum temperature 40.0 degrees
Extreme Minimum Outdoor Temperature - 25.1 Degree
Relative humidity 40%
Elevation 923M
Summer atmospheric pressure 890.9 mbar
Winter atmospheric pressure 903.5mbar
Power supply: It should conform to China's electrical specifications.
Voltage: 380V and 220V Frequency: 50Hz
All electrical equipment shall be suitable for the following operating conditions and shall not affect its performance.
Voltage fluctuations: 380V (+10%) and 220V (+10%)
Frequency fluctuation: 50 Hz +2%
Grounding resistance: <0.5
Distribution cabinet over 1.5 meters
