Active Member
|
[China]
Address: Solarshine industrial zone, Number 61, longxing lu north, Pingshan , Shenzhen city, China
Contact name:Simon Li
SHENZHEN SOLARSHINE RENEWABLE ENERGY TECHNOLOGY CO.,LTD. |
|
|
black chrome solar thermal collector panel for solar hot water heating system
SOLARSHINE C-series flat plate solar collector is special designed for high grade residential solar water heating systems, this solar collector is also suitable to be installed in any climate regions.The collector is elegant-design with firm structure and manufactured by top quality materials.
We offer 2 models with different cost budget, (78mm and 85mm frame), customers can chose the most suitable model accordingly.
Flat Plate Collector Working Principle
Converting solar energy into heat energy, then transferring the sunshine passed across the low iron safety transparent glass of the collector, which heats up, and gets a great amount of the radiation from the sun. Heat into working fluid, therefore the cold working fluid from the bottom of collector is gradually heated, so that temperature is rising. Finally the heated liquid is transferred back to the top of the collector of storage tank for using. Whole process is the useful energy collection. In the meantime, due to absorber plate temperature rise, only very little of the heat emitted by the absorber escapes the cover.heating projects due to their simple design, low cost, and relatively easier installation.
| SERIES | C - Series - 2.0M2 | C - Series 2.4M2 | |||
| Model Number | C-2.0-78 | C-2.0-85 | C-2.4-78 | C-2.4-85 | |
| Ext. Dimension(mm) | 2000 x 1000 x 78 | 2000 x 1000 x 85 | 2000 x 1200 x 78 | 2000 x 1200 x 85 | |
| Gross / Aperture area | 2.0 / 1.83 (M2) | 2.4 / 2.24 (M2) | |||
| Absorber Coating | Selective black chrome coating | ||||
| Optical Performance of absorber coating | Absorption: >95% Emission: <8% | ||||
| Efficiency coefficients (Based on Aperture Area) | ŋa = 0.762 - 4.35Tm* | ŋa = 0.778 - 3.6Tm* | ŋa = 0.762 - 4.35Tm* | ŋa = 0.778 - 3.6Tm* | |
| Abosrber Material | Copper Fin / L1840 X W140 x δ0.15mm | ||||
| Risers tube | Copper TP2- L1886 x Ø10 x δ0.5mm | ||||
| Riser quantity | 7PCS | 9 PCS | |||
| Frame Casing/ Wall Thickness | Aluminum alloy 6063/ δ1.1mm | Aluminum alloy 6063/ δ1.4mm | Aluminum alloy 6063/ δ1.1mm | Aluminum alloy 6063/ δ1.4mm | |
| Fluid Capacity | 1.6L | 2.1L | |||
| Bottom Insulation and thermal conductivity | 20mm super-heat protection phenolic insulation board. (Very low thermal conductivity: 0.023w/m.k) | Layer 1: 20mm super-heat protection phenolic insulation board. Low thermal conductivity: 0.023w/m.k Layer2: 25mm fiberglass wool+alu foil cover Thermal conductivity: 0.034w/m.k | 20mm super-heat protection phenolic insulation board. (Very low thermal conductivity: 0.023w/m.k) | Layer 1: 20mm super-heat protection phenolic insulation board. Low thermal conductivity: 0.023w/m.k Layer2: 25mm fiberglass wool+alu foil cover Thermal conductivity: 0.034w/m.k | |
| Back Sheet | 0.4mm aluminum (integrated with phenolic insulation board) | ||||
| Glass Cover | 3.2mm tempered, low-iron patterned solar glass,transitivity >/= 92% | ||||
| Sealing Profile | EPDM rubber stripe | ||||
| Header Manifold | Ø22 / L1060 /δ0.6mm | Ø22 / L1260 /δ0.7mm | |||
| Tested/Rated working pressure | 1.2Mpa/0.6Mpa | ||||
| Net. Weight (empty) | 30kg | 31kg | 32kg | 35kg | |
| Container Load Qty (20GP/40GP/40HQ) | 165 / 340 / 360(PCS) | 155 / 330 / 350(PCS) | 130 / 280 / 300(PCS) | 120 / 262 / 280(PCS) | |
