|
[China]
Trade Verify
Contact name:
Beijing Silk Road Enterprise Management Services Co.,LTD |
|
Verified Suppliers
|
|
|
| Parameters | ||||
| PCB area | 10mm*10mm - 345mm*355mm | |||
| XYZ Axis travel | 510mm*460mm | |||
| Z axis moving range | 15mm | |||
| Feeders | Left 29pcs + right 29pcs | |||
| 8mm=44pcs, 12mm=8pcs, 16mm=4pcs, 24mm=2pcs, | ||||
| Front IC stack=14pcs, user-defined IC tray | ||||
| Drive | Closed-loop control stepper servo drive system, make sure never lose step | |||
| Precision | ±0.015mm | |||
| Z axis self-return detection | Yes, prevent nozzles breaking | |||
| Pull pin self-return | Yes | |||
| Vision system | Dual cameras (up & down cameras) | |||
| Leakage of material detection method | Vacuum detection, vision detection | |||
| Touch screen | 7”industry touch screen | |||
| Main board | Independent research industry main board | |||
| System | Embedded Linux system | |||
| Mounting speed | 5000cph (vision off); 3000cph (vision on) | |||
| Mounting precision | ±0.025mm | |||
| Components | 0402-5050,SOP,QFN (tape width: 8MM,12MM,16MM,24MM) | |||
| Machine dimension | L 960mm* W 705mm* H 335mm | |||
| Vacuum pump | -92KPA (2pcs,build-in, mute type) | |||
| External air source | No need (machine build-in mute vacuum pump 2pcs) | |||
| External PC | No | |||
| Voltage | 220V (110V), 50Hz | |||
| Net weight | 68kg | |||
| Gross weight | 85kg / 116*80*52cm / 0.62m³ | |||
Feature
| Vision System Ensure Accuracy | 30pcs Yamaha pneumatic feeder supported | |||
| Auto correction offset | simple & convenient operation | |||
| The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy. | CHM-T530P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder. | |||
| Closed-loop Motion Control System | Z Axis Detection | |||
| it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly. | Z axis detection function can self-checking the height and angle during placement. | |||
| Make sure machine work perfectly with different kinds of components. | ||||
| 9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient. | ||||
| Industry Touch Screen | Mark point auto calibration | |||
| more accurate with vision system | ||||
| Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour. | After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation. | |||
| Front IC Bulk Material Area | IC Tray Supported | |||
| software allow 20 user-defined IC tray | ||||
| 11pcs front bulk IC stack, suitable for some bulk ICs. more convenient. | User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking. | |||
* Supply original new and used SMT spare parts.
* Supply Copy new SMT spare parts.
* Supply SMT relate equipment.
* Supply SMT ancillary products and tools.
* Repair Service.
Our products have won a good reputation all over the world,
We’re sincerely looking forward to serving youin the nearest future.
