Active Member
|
[China]
Address: HENGFENG INDUSTRIAL AREA,ZHOUSHI ROAD NO. 739,HEZHOU COMMUNITY,HANGCHENG STREET,BAOAN,SHENZHEN,CHINA
Contact name:Linda
Shenzhen Eton Automation Equipment Co., Ltd. |
|
|
Smt Printer Smt Semi Automatic Pcb Printer Automatic Solder Paste Printer
ET-F1500 automatic stencil printer
The basic process common to automatic solder paste printing machine and semi-automatic solder paste printing machine, automatic solder paste printing machine theoretical single board printing cycle time: 11S + printing travel time.
Working mode
Using metal scraper, steel mesh, PCB fixed by vacuum suction. The optical positioning point (MARK point) of the substrate and the stencil on the workbench is centered by the printer camera, and the substrate and the stencil are finely adjusted to completely overlap the substrate land pattern and the stencil opening pattern.
Substrate processing function
The substrate processing machine includes transport transport, positioning, and support of the PCB substrate.
Transmission and transportation refers to the movement of the PCB into and out of the PCB and the small movement back and forth before the PCB is fixed.
The positioning of the substrate is divided into two types: hole positioning and edge positioning, and optical positioning to correct the position to ensure accurate position. The support of the substrate is to maintain a flat surface of the printed PCB so that the PCB substrate does not deform and distort during the printing process. The methods used include support PIN, support block and support plate. Supporting PIN is more flexible and less restrictive. It is more commonly used at present; support blocks and support plates are more limited, and are generally used in single-sided processes.
ET-F1500 is automatic stencil printer
ET-F1500 is suitable for smt production line, it is max pcb size is 1500*350 mm, suitable for most of pcb products.
Screen frames
| Screen Frames | Min Size | 1100X300mm |
| Max Size | 1800X750mm | |
| Thickness | 25~40mm |
Squeegee
| Squeegee Speed | 6~200mm/sec |
| Squeegee Pressure | 0~15Kg |
| Squeegee Angle | 60°/55°/45° |
| Squeegee Type | Stainless steel(Standard), plastic |
PCB
| PCB Min Size | 80X50mm |
| PCB Max Size | 1500X350mm |
| PCB Thickness | 0.4~6mm |
| PCB Warpage | ＜1% |
Transport
| Transport Height | 900±40mm |
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right |
| Transport Speed | Max 1500mm/S Programmable |
Board location
| Board Location | Support System | Magnetic Pin/Up-down table adjusted/supportblock by hand |
| Clamping System | side clamping,vacuum nozzle |
ETON is focus on smt
We are set up in 2011, but we set up the R&D center in 2007, from then, began to LED special purpose SMT machine technology and patent research and development. In the past 12 years, we have focused on the production and development of LED placement machines, and have achieved great results, occupying 70% or 80% of the market share in the domestic market, and opening up the world in foreign markets. The door, and actively expand new areas, there are specialized offices abroad to better serve customers.
