Active Member
|
[China]
Address: Fuyong, Baoan ,Shenzhen City,China,
Contact name:Lizzy
SMT LINE EQUIPMENT.CO.LTD |
|
|
Online SMT Line Equipment Single Sided PCBA Cleaning Machine 500W
PCBA online single-sided cleaning machine
CNSMT is a professional manufacturer of cleaning equipment, established in 2010. It is a high-tech enterprise with certain independent intellectual property rights, integrating R&D, manufacturing, sales and service.
CNSMT has long focused on the development and expansion of cleaning equipment, and has a good industry background and professionalism. Through long-term accumulation, it has mastered relatively complete cleaning technology and operating experience. It has one of the most professional cleaning equipment R&D and operation teams in China.
CNSMT will do every piece of equipment as its own responsibility, and provide customers with high-quality products as its goal. Successively developed: fully pneumatic stencil cleaning machine, automatic water-based stencil cleaning machine, automatic PCBA online cleaning machine, automatic PCBA offline cleaning machine, automatic brush cleaning machine, automatic fixture cleaning machine,
Series of cleaning equipment such as automatic nozzle cleaning machine, automatic camera module cleaning machine, and automatic wafer cleaning machine. Involved areas: SMT, PCB, CCM, semiconductor, printed optical glass, precision hardware, flexible PCB, module PCB, motherboard PCB, and other products cleaning. At the same time, CNSMT has corresponding equipment and cleaning solutions for Singapore TENICK cleaning agent.
Covers all application areas of the electronics industry and
precision machinery assembly cleaning
Cleaning process:
1. Stencil for printing solder paste and glue 1. Water-based spray
cleaning
2. SMT carrier and wave soldering furnace fixture 2. Air
atomization cleaning
3. PCBA flux contaminants 3. Solvent spray cleaning
4. Misprinted board 4. Plasma cleaning
5. Flux cleaning of PCB and mixed substrates 5. Ultrasonic cleaning
6. Clean the oil stains on tools or parts
7. Precision machinery and optical parts
8. Oil cleaning of lead frame before device assembly
9. Wafer cleaning after cutting or grinding
10. Cleaning of UV glue residue on the carrier of the online
dispenser
Product Description
Cleaning area: two groups of cleaning, cleaning tanks are used to
recover and store cleaning fluid, and perform 3-level filtration
and level monitoring of the cleaning fluid.
Pre-cleaning water pump: (1));
Liquid storage tank volume: ≤ 40L (1)
Liquid level protection: low and over-limit.
Scrubbing area: Two scrubbing areas, 360-degree disk scrubbing, to
remove stubborn tin beads and dirt.
The brushing speed is adjustable, and different speeds can be
adjusted for different products to achieve a better brushing
effect. First-level roller brush cleaning (nylon soft black hair,
anti-static),
Two-stage dry disc brush (nylon soft black wool, anti-static),
three-stage roller brush cleaning (nylon soft black wool,
anti-static), four-stage dry disc brush (nylon soft black wool,
anti-static).
Drying area: There is a cooling fan at the output end to dry the
PCBA.
| content | parameter |
| Appearance size of equipment: | 2100mm(L) × 1100mm(W) × 1100mm(H) (L: including inlet connection 350mm) |
| PCBA board cleaning maximum size: | 350mm(W)×100mm(H) Unlimited length |
| Size of cleaning drum: | Ø120mm |
| Size of cleaning disc: | Ø350mm |
| Spindle speed: | 0-500 revolutions/minute (adjustable) |
| Process flow: | Loading board—chemical pre-wash—disc brushing—chemical cleaning—disc brushing—fan drying 1 |
| Calculation of production capacity: | Transmission speed: 0.1~1.5m/min can be adjusted, it is recommended that the working speed be adjusted to 0.4—1m/min |
| Basis: According to 350mmX100mm board, working speed of 1m/min; | |
| Hourly output: about 600PCS/H (speed/length*60) This output is for reference only, subject to actual conditions) | |
| Conveying surface height: | 750±50mm (adjustable) |
| Entrance and exit directions: | Left in and right out (viewed from the front window of the unit) |
| Exhaust flow rate: | Approximately 6M³/Min; exhaust outlet diameter: 120mm, 2 front and rear |
| weight: | About 310KG |
| Power requirements: | AC220V/50H; total power 500W |
The automatic water cleaning machine is an integrated high-end cleaning machine with energy saving, environmental protection and batch cleaning, which can complete the cleaning and air-drying functions automatically and online;
a. Mainly used for the cleaning of multi-variety and large-volume
PCBA boards for coating products and high-end precision products
such as military industry, aviation, aerospace electronics,
medical, automotive new energy, automobiles, etc.
It can effectively clean the residual rosin flux, water-soluble
flux, no-clean flux/solder paste and other organic and inorganic
contaminants on the surface of SMT/THT PCBA after soldering;
b. Cleaning of solder paste and red glue on PCB boards with poor printing.
Packing & Delivery
Certification
Company Information
CNSMT is the leading manufacturer and supplieir for SMT machines
and Solution with over 10 years' experience in China. And we can
also do OEM&ODM for SMT traders, we have vast of sources in SMT
field,even you need used or new SMT equipments or other parts, we
can help you get the best quality and competitive cost machines.
What we can do for you:
※ We have our own factory make SMT equipments and devices
※ We have a professional technich engineer team for produce
machines
※ We can customize variety of SMT machines for you according your requirements
※ We buy and sell used and new SMT equipments all over the world
※ We provide you SMT full line machines and export to worldwide
※ Becoming the most reliable Chinese partner for you.
FAQ:
1. Are you factory?
Yes, we are factory supplier focus on humidity control for 14 years.
2. Can you email the catalog?
Yes, we can send you by email with whole catalog.
3. How to order online?
Confirm product (quantity, price, payment, shipping etc)---waiting
for email ---confirm order---make initial payment---production
finish---make balance payment---shipping
* click to learn about trade assurance
4. What about the payment way?
30% deposit, balance paid before delivery -- amount > USD5,000
100% deposit -- amount < USD5,000
5. What's the shipping way and timing?
We suggest to ship by sea to get cheapest rate, voyage date to
America around 30~40 days, to Europe 25~30 days, to Asia and
Austrilia 7~15 days. Click here to get exact timing.
6. What's the warranty item?
Warranty time normally is 12 months, if you want to extend the
warranty time to 24 months, the value will be 10% more of your
order.
7. Can I visit your factory?
Yes sure, welcome to visit our factory to get more profit.
8. How to contact with your factory?
Send inquiry in below form or send mail or call to select your way.
Click here
9. Can you customize the product?
Yes, we can customize any products according to customer's
requirements.
10. Which payment terms are you doing?
PayPal, West Union, T/T, (100% payment in advance.)
11. Which shipment is available?
By sea, by air ,by express or as your requirement.
12. Which country you have been exported?
We have been exported to many countries, all most all around the
world, like Malaysia, Vietnam, Thailand, United States, France,
Spain, Mexico, Dubai, Japan, Korea, Germany, Porland Etc.
