|
[China]
Trade Verify
Address: 2-3/F, Building 4, Outer Diameter Industrial Park, Fucheng Street, Longhua District, Shenzhen
Contact name:Wang
Shenzhen Kanghongjin Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
| M06 series SMT Single Splice Tape for Siemens and Fuji machine |
 |
| DESCRIPTION |
M0608 Single Splice Tape Roll differs as the pre-cut strips are supplied on a roll and in smaller |
| quantities per unit. The standard length of the single splice tape is 45mm per strip. The width varies |
| with the reel size. Three kinds of anti-static, half anti-static and non anti-static. |
Part (reel) | Dimensions (pc) | Package |  |
| M0608 (8mm) | 4.8mm x 45mm | 1000pcs/box | |
| M0612 (12mm) | 8mm x 45mm | 1000pcs/box | |
| M0616 (16mm) | 12mm x 45mm | 1000pcs/box | |
| M0624 (24mm) | 20mm x 45mm | 1000pcs/box |
| APPLICATION | ADVANTAGES |
1. Light blue colored strips of PET tape | 1. Increase Pick and Place machine output |
on a roll used to join SMT carrier tapes | by 5% - 30% |
2. Use with the splice tool and clip to | 2. Reduce reel change downtime |
create a stronger connection, especially | 3. Decrease machine abrasion by reducing |
on larger carrier tapes | the need to reload the feeder |
| 3. 32mm-44mm available upon request | 4. Tape strips on a roll for convenience |
5. Accept OEM/EDM, Anti-static, half anti-static | |
| and non anti-static |
INSTRUCTIONS
1. Use the cutting tool (MTL20/MTL30/MTL40) to accurately cut the carrier tapes. |
2. Place a splice clip (teeth up) on the splice tool’s placement pins. |
3. Center both carrier tapes (cover tape up) on the pins, and secure with the clamps. |
4. Crimp the tool handle to connect the carrier tapes. |
5. Remove the release liner of the splice tape to reveal the adhesive side. |
| 6. Add a single strip to the cover tape and press firmly to complete the splice. |
 |
| ceo@szsmt. com |
