Shenzhen Kanghongjin Electronics Co., Ltd |
Verified Suppliers
|
|
DESCRIPTION |
M022 Series SMT tapes are designed specifically for Panasonic machines with an intelligent feeder. |
The black strip will allow the sensor to detect the splice. |
This splice tape is made by our produced glue with superior adhesion. |
Part (reel) | Dimensions (pc) | Package | |
M2208 (8mm) | 4.8mm x 40mm | 500pcs/box | |
M2212 (12mm) | 6mm x 40mm | 500pcs/box | |
M2216 (16mm) | 9.5mm x 40mm | 500pcs/box | |
M2224 (24mm) | 16mm x 40mm | 250pcs/box |
APPLICATION | ADVANTAGES |
1. Strips of PET tape used to join | 1. Necessary for Panasonic machines with |
8-88mm SMT carrier tapes | an intelligent feeder |
2. Suitable for Panasonic machine | 2. Reduce reel change downtime |
3. Possible to use without the | 3. The black strip allows the sensor to |
splice tool and clip | detect the splice |
4. Placement holes for easy alignment | |
INSTRUCTIONS
1. Use the splice cutting tool to accurately cut the carrier tapes. |
2. Place the splice tape (face down/Arrow>) on the alignment jig. |
3. Remove the release liner of the splice tape to reveal the adhesive side |
4. Place the cut carrier tapes (cover tape down) on the splice tape strip. |
5. Remove the joined carrier tapes from the alignment jig. |
6. Fold over the strips to the underside of the carrier tape and press firmly |
7. Remove and discard the clear plastic cover to complete the splice. |
ceo@szsmt. com |