|
[China]
Trade Verify
Address: 2-3/F, Building 4, Outer Diameter Industrial Park, Fucheng Street, Longhua District, Shenzhen
Contact name:Wang
Shenzhen Kanghongjin Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
K700 Removable SMT Trolley ESD SMT Splice Cart With Wheels
| DESCRIPTION |
K700 SMT Splicing Tool ESD SMT Splice Cart. A trolley for the placement of splicing tool, clips |
| and tapes and equipped with rotatable wheels, it can be moved freely on different SMT production |
| lines. |
| Part | Dimensions | Material | Packing |
| K700 | 100~110cm x 55cm x 42cm | Steel body + Hollow board | 1 Pcs per box |
| APPLICATION | ADVANTAGES |
| 1. It can be moved freely on different | 1. ESD design to eliminate the static |
SMT production lines | damage in the production lines |
2. Must be used with KangHongJin | 2. Wheel rotatable can be movable around |
| splicing tool MTL60 | production floor in all direction |
| 3. Allow two operators to splicing tape | 3. Splicing plate: Height can be adjusted |
| simultaneously | 900mm~1030mm. |
| 4. Easy operation and good reliability, | 4. Special designed tool base and copper scrap |
| improve the efficiency | collection box: splice plier can be rotated freely |
| 5. Junk box: simple and light with anti-static |
INSTRUCTIONS
| 1. Adjust the SMT Splice Cart to make the height suitable for youreself |
| 2. Place the component carrier tape on the 2mm or 4mm pitch placement pin guides. |
| 3. Intall M0700 clips on MTL60 |
| 4.Center both carrier tapes (cover tape up) on the pins, and secure with the clamps. |
| 5. Crimp the handle to connect the carrier tapes and remove |
| 6. Add a splice tape strip to the cover tape and press firmly to complete the splice. |
 |
| ceo@szsmt. com |
