Active Member
|
[China]
Address: Shenzhen baoan district airdropping street 152 exhibition city community JingFang road industrial park plant F 203
Contact name:Jing-liang Zhang
Shenzhen Xinyinglong Electronic Technology Co., Ltd. |
|
|
2K VI AOI optical detector equipped with holographic diffuser RGB floodlight and 12-8 m pixels of a CCD camera:
VI AOI 2 k optical detector equipped with holographic diffuser RGB floodlight and 12-8 M pixels of a CCD camera, and equipped with telecentric lens (2) can detect 01005 components and a variety of the opposite sex element, detection speed can reach 100 cm2 / s, can detect components per hour, 480, 000 (3) high precision linear motor 1 mu M and 4.75 mu M sub pixel technology
SMT Advantage:
Surface mount technology, SMT and its associated surface mount
devices, SMDs considerably speed up PCB assembly as the components
simply mount on the board.
Look inside any piece of commercially made electronic equipment
these days and it is filled with minute devices. Rather than using
traditional components with wire leads like those that may be used
for home construction and kits, these components are mounted onto
the surface of the boards and many are minute in size.
1. Good mechanical performance under shock and vibration conditions. (Partly due to lower mass, and partly due to less cantilevering.)
2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.
3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.
4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)
5. Reasonable initial cost and time of setting up for mass production, using automated equipments.
Introduction to VI 2K AOI Optical Inspection Machine |
1. Equipped with RGB illuminator with holographic diffuser and 12-bit-8M pixel CCD camera, and equipped with telecentric lens |
2. It can detect 01005 components and various heterogeneous components, the detection speed can reach 100cm2/s, and the components can be detected 480 000 per hour |
3. High-precision linear motor 1μM and 4.75μM sub-pixel technology |
4. The programming is simple and the program is completely portable, providing ultra-high quality images at the rework station |
5. The use of large-scale parallel computing mode (image processing unit) greatly improves the detection efficiency |
6. The detection coverage rate of MELF components and special defects such as pin floating, side standing, tombstone, and virtual soldering has been greatly improved |
7. Compact size and small footprint |
Shenzhen letter surplus lung electronic technology co., LTD., dedicated to electronic manufacturers to provide SMT equipment as follows:
MPM printer, Koh Young SPI, Easa reflow soldering
Siemens placement machine, FUJI FUJI SMT machine, panasonic SMT machine
The AOI, lu Vitronics Soltec reflow soldering, non-standard automation equipment, SMT machine rental lease
The SMT production line equipment, and SMT components, SMT supplementary materials, services and solutions.
Many electronics manufacturers say: no matter where SIPLACEX series of nominal value can reach the maximum velocity and absolute required
Precision (applicable to mobile phones, tablet PC, laptop
computers, LED mount, etc.).
Provide the customers with top speed, the lowest DPM, the stability
of the 0201 (metric system) to handle ability, no line set up
conversion and rapid new product import, and other functions.
SIPLACEX series cantilever modular function, can provide 2, 3 or 4
cantilever.
Hard to believe? We look forward to receiving your letter -
equipment compare with other manufacturers.
Understand SIPLACEX series of how to optimize the special production process, how to quickly recoup their investment, and it has other competitive advantage.
