Knowhow technology CO., Limited. |
|
Smt sanyo tcm3000 Z41 nozzle (6300529579) used in pick and place
machine
SANYO TCM 3000 SMT NOZZLE
Part Number
Description
6300529586 TCM SANYO SMT
NOZZLE 3000 - Ø 0.6 / Ø 0.4
6300523609 TCM SANYO SMT
NOZZLE 3000 -Ø 1.5 / Ø
0.5
6300529616 NZ. Ø 1.8 / Ø
0.5
6300529517 NZ. Ø 0.9 / Ø
0.7
6300529579 NZ. Ø 1.3 / Ø
0.9
6300529524 NZ. Ø 1.8 / Ø
1.1
6300529548 NZ. Ø 3.0 / Ø
2.0
6300529531 NZ. Ø 6.0 / Ø
4.5
6300529555 NZ. Ø 1.3 / Ø
0.9 (MELF)
6300529562 NZ. Ø 2.5 / Ø
1.2 (MELF)
SANYO V820/V822 SMT NOZZLE
Part Number Description
6300298673 V820 / V822
NZ. Ø 0.5
6300322590 V820 / V822
NZ. Ø 0.9
6300322606 V820 / V822
NZ. Ø 1.3
6300298604 NZ. Ø 1.8
6300298611 NZ. Ø 1.8
6300298635 NZ. Ø 3.0
6300298628 NZ. Ø 6.0
6300310726 NZ. Ø 1.3
(MELF)
6300298659 NZ. Ø 2.5
(MELF)
SANYO TCM-60 TCM-V1000 SMT NOZZLE
Part Number Description
N001
NZ. V
N002
NZ. Ø 1.8
N003
NZ. Ø 4.0
N004
NZ. Ø 6.0
N005
NZ. Ø 1.8 / 6 HOLES
N81
V1000 NZ. Ø 0.6 / Ø 0.3
N11
V1000 NZ. Ø 0.9 / Ø 0.6
N71
NZ. Ø 1.3 / Ø 0.8
N21
NZ. Ø 1.8 / Ø 1.0
N41
NZ. Ø 3.0 / Ø 2.0
N31
NZ. Ø 6.0
N51
NZ. Ø 1.3 (MELF)
N61
NZ. Ø 2.5
Issues related to improper nozzle/feeder maintenance or use of poor
quality nozzles are often the same. Here are some of the most
common problems:
1. Poor pickup location on part. It will cause a loss of vacuum and
result in parts shifting on the nozzle during transport.
2. Short/worn nozzles result in poor pickup and can cause the part
not to be imbedded into the paste. When the part is not placed into
the paste correctly there is not enough surface tension to hold the
part while the PCB is moving. Parts will shift.