|
[China]
Trade Verify
Address: Floor 2, building 30, gaoshan community, dalang street, longhua district, shenzhen
Contact name:Zhang
Shen Zhen Xinmeiwei Co., Ltd. |
|
Verified Suppliers
|
|
|
Light Weight Smart Air Inflator Overcurrent Protection Speed Inflation Safe Use
Smart Air Inflator Features:
Using all-copper cylinder powder metallurgy gear permanent magnet motor, durable and fast heat dissipation, stable air volume up to 35L/min, noise less than 78 BD, tens of thousands of safety tests, precious tire pressure chip, accuracy +_0.1Kg/ Square centimeter, anti-noise, strong dynamic and quiet below 78BD, air flow of 35L/min, increasing the inflation efficiency of scarred tires by 3 times.
Smart Air Inflator parameter:
Storage temperature | -20～60℃ | battery capacity | 8800mAh |
Product Size | 150x129x37mm | Operating temperature | -20~50℃ |
charging port | Type-C | inflation speed | Car tires (185/60/R15) about 5 minutes |
Charging parameters | DC5V/2A | Inflatable tire time | Fully charged can be used continuously for 30 minutes. |
USB output | DC5V/2A | Instantaneous maximum current | 600A |
charging time | about 6 hours | Trachea size | The length of the trachea pulled out is 240mm (including the gas nozzle) |
LED lighting | 1 LED light | Battery folder | Equipped with 1 rear power supply clip |
Smart Air Inflator Use Skills:
1. Tighten the inflatable tube to the trachea socket;
2. Buckle the air nozzle on the tire air core and then buckle the pressure handle;
3. Press and hold the power switch, the remaining power of the device will be displayed at this time, press to select the inflation mode, then press to select the inflation unit, press + or - to adjust the tire pressure, press the button to start the air pump to inflate, and stop when it reaches the set value.
