Results forsma male rf load terminationfrom 30 Products.
|
|
50Ohm SMA Male RF CoaxTermination 2 Watt Power DC-18GHz Chip Resistor Load Terminations, or loads, offered by Xi‘an Elite Electronic are matched to 50 ohms characteristic impedance...
|
|
|
|
|
SMA-Male Termination Features a Frequency Range of DC-18GHz with an Average Power Rating of 5 watts Terminations, or loads, offered by Xi‘an Elite Electronic are matched to 50 ohms ...
|
|
|
|
|
10 Watts 3.8GHz 4GHz N Male RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or ...
|
|
|
|
|
2 Watt Power 50Ohm SMA Male RF Coax Load/Termination DC-18GHz Cylindrical Resistor The low-power matched RF load designed and produced byElite Electronic has an impedance of 50Ω, ...
|
|
|
|
|
50Ohm DC-18Ghz SMA Male 1 Watt Power RF Matched Load/Termination The low-power matched RF load designed and produced byElite Electronic has an impedance of 50Ω, including male and ...
|
|
|
|
|
SMA Male 1Watt Power 50Ohm RF Coax Load/ Terminator DC-18GHz Chip Resistor The low-power matched RF load designed and produced by Elite Electronic has an impedance of 50Ω, ...
|
|
|
|
|
0.5 Watt RF Matched Load Termination with SMP Male Connector DC - 40GHz with Chip Resistor Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers ...
|
|
|
|
|
0.5watt SMP Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and ...
|
|
|
|
|
TNCA Male 2 Watt RF Load, 23.5mm / 0.925″ in Length, DC~18GHz RF Coaxial Termination TNCA Male dummy load with 23.5mm / 0.925 inch in length, DC to 18GHz RF coaxial termination, ...
|
|
|
|
|
SMA-Male Termination Features a Frequency Range of DC-18GHz with an Average Power Rating of 10watts Terminations or loads, offered by Xi‘an Elite Electronic are matched to 50Ohms ...
|
|
|
|
|
DC-18GHz 1W SMA Male Dummy Load Part Number VN-DL-18G-1W-OSM Operating Frequency DC-18 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling ...
|
|
|
|
|
SMP Male (Plug) Termination (Load) 0.5W/1W Gold Plated 1.35 Max VSWR SMP male RF load from Xi'an Elite Electronic is 50 Ohm impedance and is rated for a maximum frequency of 40GHz. ...
|
|
|
|
|
TNC Male (Plug) Termination (Load) 1 Watts low Power To 18 GHz 1.25 VSWR 1Watts Power TNC male RF load from Xi'an Elite Electronic is 50 Ohm impedance and is rated for a maximum ...
|
|
|
|
|
TNC Male (Plug) Termination (Load) 5 Watts low Power to 18GHz 1.4 VSWR 5 Watts Power TNC male RF load from Xi'an Elite Electronic is 50Ohm impedance and is rated for a maximum ...
|
|
|
|
|
10 Watts 3.8GHz 4GHz N Male RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or ...
|
|
|
|
|
High-Performance 2W Chip Resistor: Microstrip Matching Load for Optimal RF Performance The small power matching load designed and produced by ELITE Electronics has an impedance of ...
|
|
|
|
|
2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical ...
|
|
|
|
|
2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical ...
|
|
|
|
|
60W DC-18GHz N-Male Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , ...
|
|
|
|
|
60W DC-18GHz N-Male Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , ...
|
|
|
You may also be interested in :
