sewage treatment dosing device Manufacturer fully automatic
integrated dry powder dosing system
The three compartment integrated PAM dosing device is composed of
water supply system, dry powder dosing system, dissolution curing
system, control system and liquid dosing system.
The three compartment automatic dosing device is an intelligent,
fully automatic and continuous flocculant dissolving and dosing
device. The concentration of the prepared solution is generally
0.1% - 0.5%.
Working principle
The dosing system is automatically controlled by PLC, and the
control box is connected to the liquid level gauge installed on the
solution storage tank. Once the liquid level reaches the "low
level", the solenoid water inlet valve is triggered to open, and
the dry speculation is started at the same time. The size and
amount of dry dosage can be accurately set to obtain accurate
concentration. Once the "high bit" is reached, the cycle stops.
The whole preparation process of the dosing equipment is controlled
by PLC, which can realize the functions of automatic intermittent,
continuous operation and stop cross mixing, so as to make the
solution blend evenly. When the dry powder level in the hopper
reaches the low level, the electric control box can send out
audible and visual alarm signals and stop the whole machine.
Application
The fully automatic dosing device is safe, convenient, reliable and
widely applicable, especially to the paper industry, industrial
wastewater treatment and municipal wastewater treatment plants,
water plants and various industries that need to use flocculant
solution.
Parameters
Type | QJY-500 | QJY-1000 | QJY-1500 | QJY-2000 | QJY-3000 |
production abilityQ(L/h) | 500 | 1000 | 1500 | 2000 | 3000 |
Size | 900x1500x1650 | 1000 x 1625 x1750 | 1000 x 2440x1800 | 1220 x 2440 x180C | 1220x3200x2000 |
|
Powder Dosing PowerNi(KW) | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 |
blender | Blade diameterG(mm) | 250 | 250 | 250 | 250 | 250 |
Vertical spindle speed(i/min) | 96 | 96 | 96 | 96 | 96 |
PowerN2(KW) | 0.55 x 2 | 0.55x2 | 0.55 x 2 | 0.55x2 | 0.55x2 |
Dosing screw pump | Flow Q2(mV h) | 1 | 1 | 1.5~2.0 | 1.5-2.0 | 3.0~ 5.0 |
Lifth(m) | 20 | 20 | 20 | 20 | 20 |
Power N3(KW) | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 |
Water Inlet Dia(mm) | 20 | 20 | 25 | 25 | 32 |
Water outlet Dia(mm) | 20 | 20 | 25 | 25 | 32 |
Installation | B | 900 | 1000 | 1000 | 1220 | 1220 |
L | 1500 | 1625 | 2440 | 2440 | 3200 |
H | 1650 | 1750 | 1800 | 1800 | 2000 |
Hi | 800 | 1050 | 1050 | 1050 | 1350 |
Real picture
Operating Steps
Note: different plc control systems may have some differences in
operation. Please follow the manufacturer's instructions. This is
mainly for the three tank integrated dosing device.
1. Connect the power supply, pipeline and water source, and do a
good job of basic security.
2. Switch the change-over switch of metering pump of dosing pump,
inlet solenoid valve, dissolution tank mixer, and connecting valve
between raw liquid tank and dissolution tank to the "remote"
position. Adjust the stroke speed of the metering pump on site.
3. Move the floating ball of the box up and down one by one by hand
to see whether the signal can be sent normally, and then check
whether the level alarm in the hopper can work normally.
4. Return to the central control, click to enter the "dosing
system" screen, and manually adjust the output frequency of the
metering pump.
5. Open the water inlet valve and press the start button of the
feeding motor to start feeding. Stop feeding after one minute of
operation.
6. Observe the liquid level gauge. When the liquid level gauge
reaches the required height for dilution of raw solution, close the
inlet solenoid valve and the mixer. Click the icon of the outlet
valve of the dissolution tank to open the outlet valve, and click
the icon of the metering pump to open the metering pump. Pay
attention to the liquid level gauge and flowmeter. When the liquid
level is too low, turn off the metering pump in sequence and close
the liquid outlet valve.
7. Weigh the polymer in the container and make records.
8. Stop the feeder.
Company Profile
Jiangsu Longdai Environmental Technology Co., Ltd. is an
environmental protection equipment manufacturer with 11 years of
experience. It has provided a large number of sophisticated
environmental protection equipment at home and abroad, established
three branches in China, and cooperated with many universities to
build Longdai R&D center. There are 4 middle doctors, 10
masters, and 25 senior engineers.Main business: "Petrochemical Wastewater Treatment, Urban and Rural
Wastewater Treatment, Waste Gas Collection and Treatment,
Industrial Wastewater Treatment, etc."
Main equipment: "Integrated treatment equipment, grille
decontamination machine, sand water separator, mud scraper, air
flotation device, dosing device, sludge thickener, rotary drum
micro filter, conveyor, etc."
The technical team participates in technical exchange meetings
every year, exchanges experience with professionals, continuously
improves technical competitiveness, and provides customers with the
clearest and most practical design solutions.
The processing team controls the manufacturing details of each
equipment, and manufactures the most sophisticated and reliable
equipment for customers.
The company has passed ISO9001-2008 international standard quality
system certification.
We look forward to contacting you, please give us a chance. I hope
we can trust each other for mutual benefit and win-win results.
FAQ
Q: How Can I Find The Suitable Model?
A: Please Provide Flow Rate, Solids Content And Sludge Type, or
directly contact us by the clicking the “contact” icon. We Can
Assist You In Model Selection.
Q: Where Is Your Factory Located?
A: Yixing City, We are in the famous city of environmental
protection equipment ,professional for Sludge screw press
dewatering Machine ,Which Is Very Close To Shanghai With Only Less
Than 3 Hours' Driving. Welcome for your visiting.
Q: Do You Provide OEM Service?
A: Yes. We Can Do The Customized Design According To Your Different
Request for sludge Dewatering.
Q: How About The Production Capacity Of Your Company?
A: Our Factory Covers Area Over 15,000m² And Produces Machines 2000
Sets Per Year.
Q: How Could We Trust You And Your Company? Is This Your First Time
Transaction?
A: A: Our Company Has More Than 20 Years Professional Experience.
We Cooperate Over 800 Customers in China And Overseas. We Export
Nearly 60 Countries All Over The World. And We Have More Than
60+Patents, CE,ISO 9001,SGS Certificates.
Q: Do You Offer After-Sales Service?
A: Video Technical Support, Online Support,Spare Parts, Field
Maintenance Repair Service