Eye Care Portable RF Micro Current Facial Beauty Equipment OEM

Portable RF Micro Current Equipment Firms The Skin Around The Eyes

Operation process of eye protection instrument

1. Check the equipment. If there is no problem, start the machine to ensure that the equipment works normally.

2. Use 75% alcohol to disinfect the energy output surface (direct contact surface) of the treatment head.

Touch the customer's skin).

3. Adjust the appropriate parameters on the interface (pulse time and energy from low adjustment, It is recommended that the mode be adjusted according to the operation mode and usage habits of thebeautician

Use single beat mode), after the adjustment is completed, start the function (switch) on the interface STAND BY to PAUSED) to give the operator enough time to cool down ahead of schedule. Parcel customer's Hair, then remove makeup and clean the operating area (face).

4 Apply the gel to the client's face or apply the gel to the energy output surface of the treatment head.

When operating, it is necessary to ensure that there is enough gel in the operating area as a medium. If it is

No, please reapply in time.

5. Wear disposable gloves.

6. The energy output surface of the treatment head is close to the skin, and then the operation begins Start button or foot switch by handle. Power output (handle indicator light Light, sound prompt), move slowly, energy output is complete (handle indicator light Light off, sound prompt)) STOP running. Pulse time and energy should be adjusted Based on real-time feedback from customers, it is recommended to have acceptable energy and

The obvious warmth.

7. Move the handle to the next area and follow the method at point 8, and so on until you reach all parts

(For details, see Operation Method.)

8. Replace the treatment head according to the method of point 6, 8 and 9.

9. After the operation, apply the mask to the operation site for 15-20 minutes.

10. Wipe off the residual product on the customer's operation site with a wet cotton pad.

11. Clean handle and treat residual product on head, then wash with 75% alcohol Disinfect the energy output surface of the treatment head.

12. Remove the treatment head from the handle and turn the energy output face up.

When turning off the device, wipe the surface of the host clean with a wrung out wet cloth.