SAPPHIRE GROWER FURNACE, HIGH TEMP CERAMIC INSULATING ARCH BRICK

High Purity of Alumina Ceramic Insulating Tube in Artificial Crystal Grower

 
Product Introduction
 
 High Purity of Alumina Ceramic Insulating Tube we are producing is taken the high purity of e-fuzed alumina grain and powder as the raw material, sintered in the high temperature state continuously. 
 
Obvious advantages of Thermal Field
 
Using the high purity of the alumina ceramic insulating tube as the outside layer of the thermal field of the artificial crystal (sapphire, Gem laser etc.) grower, matched the zirconia ceramic quality thermal field can max protecting the therml in the furnace from emitting out, and saving plantiful of the energy and power consumption, and raising the crystal growing speed and efficiency. 
 
Key Technology of thermal field we are producing:
Rare-Earth Composite Oxide Ceramic Thermal Field 6 Unique characteristics
1.Under vacuum, protective atmosphere,air conditions, working temp. reach 2650 deg.cel.
2.Under vacuum, above 1800 deg.cel., oxygen of ceramic thermal field material release 1 time and continuous keep on at room temp.
(delay and protecting working life of other metal part in thermal field )
3.Repeatly raise and lower temp.cycle working life reach 3 years.
(Comparing metal thermal field, working life risen by 6 times.)
4.Example for 120kg grade crystal using thermal field, shorten 25% of growth cycle ,saving power consumption above 40%,comparing metal material.
5.Break through the bottlene of large-size crystal growth thermal field, realize crystal large-size mass production.
6.Recycle for ceramic thermal field working more than 3 years, through technology process, produce high temp.ceramic products as flow control refractory in metallurgy. (Achieve green, Infinite resources recycle industry system)
 
Fangming NewM Long-Term Goal
 
Based on cognition of Rare-Earth Composite Oxide Solid Solution Ceramic Material,mastery of key technology and optimization of ceramic thermal field design,Fangming Newm are willing to make Long term strategic cooperation with the crystal equipment manufacturer, crystal enterprises, supply the exceed expectations optimization program and product performance for the clients, jointly promote the continuous development and innovationworld of the world artificial crystal industry.
 
 
FAQ:
1.What is High Temp. Zirconia Ceramics ?
 
Zirconia, namely zirconium oxide, chemical formula: ZrO2, white crystalline state, with a monoclinic crystalline structure. The smelting point of cubic crystal phase is 2370-2680deg cel.Up to now, from the commercial and practical values , no other material performance can reach or overdue to its features.
 
2.Why ZrO2 Hi-Temp. Ceramics ?
 
It has the excellent chemical stability and mechanical stability at high temperature state, and strong erosion and scouring resistance for the steel liquid and slag, strong thermal shock stability, increasing the working life of the whole sliding system of the ladle, tundish, Converter, sharply and so on.

 
3.Why choose FUNMEET Made?
 
Funmeet Factory setup in 2015, lies in Refractory Town in Henan Province, Based on the zirconia nozzle products in Metallurgy, then developed the Zirconia slide plate in ladle, converter, Atomizing nozzle for powder metallurgy, thermal field in sapphire grower, up to now, has developed in the glass industry, target, arrow industry, 3D glass mould,, rocket Rocket launch platform etc. Key point industries.
 
1). Availability and Production-Time
 
All the production and testing equipments are advanced in the world, and full automatic systems, and raw material is adequate, 10sets of the large capacity of the sintering furances, ERP, IMEX System tracking, some of the order is stocking-agreement, can deliver the goods within 3days after received the delivery notice from the factory.
 
2).Long term stability of the goods and fast after-sales service.
 
Besides of the zirconia nozzle, our zirconia slide gate plate take the high purity of the zirconia grain and powder, through the series of mixing ,dry, press, sinter, polish, etc. automatic system, 4-5 times of the inspection in the whole process, and through the long-term applying in the steel plants, the quality of our products is very steady in the very long term. We have the fast after-sales service rules and regulations. After the problems happened, we will reply within 2 hours, supply the suggested ways within 6 hours and reach the practice site (in steel plant) in Chinese domestic market within 24 hours.
3). Production Capacity and material supplement
 
Every month we will have the 60tons raw material stocked in our warehouse, and we can produce the zirconia ceramic products 500tons capacity per month at per month.Up to now we are the largest zirconia ceramics professional manufacturer in China mainland.
 
4). Many kinds of transportation ways
 
We can deliver the goods at the suitable ways, include by car, by sea, by road, by air, by express, etc.
 
5. Do you usually make the material and products test by the third party?
Every month, we will make the test of the material and products in our National Quality Supervision and Inspection Center for Refractory. Mainly including the chemical composition, A.P. , B.D., and so on.
 
6) What Int’l Certificate has FunMeet obtained?
Up to now, we have obtained
 
6. How long is the production time and delivery time?
 
As usual, the time of making the mould is 10-15day, adding it, the normal production time is 20-25days.
From our factory to the destinated warehouse at loading seaport, filling the container, export custom clearance, (about 7week), then the delivery time at the loading seaport is 30-32days.