Vibration Impact Test System Simulates The Damage Of Products And Individual Components

Vibration Impact Test System Simulates The Damage Of Products And Individual Components

Product Information:

The electric vibration test system is a precision testing equipment that simulates the damage of products and individual components in the actual working environment. Its working principle is similar to that of a speaker, that is, the energized conductor is acted upon by a force in the magnetic field. This force is the excitation force of the vibration test bench. The working process of the system is that the excitation coil and the moving coil in the table body form two mutually perpendicular magnetic fields when energized. The two magnetic fields cut the magnetic lines of force with each other to generate excitation force. The vibration acceleration (a), amplitude (mm), frequency (HZ) and other indicators generated in these excitation phenomena are input to the vibration controller through the vibration sensor. The controller analyzes and processes the output to the preamplifier and power amplifier, and then the power amplifier to the stage body, and so on, to keep the vibration test system running within a stable test index. In this process, the cooling fan is used to cool the heat generated by two mutually perpendicular magnetic fields passing current. The temperature generated in the magnetic field cannot be higher than 110°C, otherwise it will cause the temperature to be too high and cause an alarm. This requires that the laboratory environment temperature where the vibration test system is located must be at normal temperature.

Components of the vibration test bench and suggested layout diagram of the laboratory site:

Technical performance:

Vibration generator (ZZ-300)
Rated sine excitation force (peak)	300kgf (3000N)
Rated random vibration force (peak)	300kgf (3000N)
Rated impact excitation force (peak)	600kgf (6000N)
Frequency Range	5～5000Hz
Maximum displacement (p-p)	25mm
Maximum acceleration	980 m/s2 (100g)
Level One Resonant Frequency	2600±5%Hz
Equivalent Mass of Moving Parts	3kg
Dynamic Coil Diameter	Φ150mm
Countertop screws	12×M8
Max. Loading	120Kg
Size L×W×H	1540×680×750mm
Weight	About 600kg
Switching Power Amplifier (KA-3)
Amplifier Output	3KVA
Rated Output Voltage	120Vrms
Signal to Noise Ratio	>65dB
Power Amplifier Efficiency	＞95%
System Protection	Temperature protection, over-displacement protection, over-voltage protection, over-current protection, under-voltage protection, external protection, logic fault protection
Dimensions	580*1020*1800mm
Weight	About 300kg
Vertical Expansion Countertop (TB-0505)
Table Size	500mm×500mm
Table Weight	25kg
Material	Aluminum alloy
Highest frequency	Sine 1000Hz, random 2000Hz
Level Table (S-0505)
Table Size	500mm×500mm
Table Weight	25kg
Material	Aluminum alloy
Highest frequency	Sine 1000Hz, random 2000Hz
Vibration Controller (VENZO-820)
Function Based on Windows 7 operating system	Basic functions: Sine; Random; Classic Shock; Resonance Search and Dwell (RSTD). 2 input channels, 1 output channel, 1 COLA output, reserved interface function (digital I/O interface) linked to the environmental test chamber
Fan (FJ-300)
Fan Power	7.5KW
Air volume	0.2M3/s
Wind Pressure	1.5Kpa
Dimensions	600*400*700mm
Duct length	4m
Weight	25kg
Accelerometer (JF)
Sensitivity	150pc/g
Frequency Range	0.3-8000Hz±10%
Measuring Range	2000g
Impact Resistance	2500g
Line length	5m
Operating Temperature	-40-150℃
Weight	35Gram
Installation Method	M5

 

System configuration list:

 

No. Configuration composition Model Remark   1 Electric vibration test system Vibration table body ZZ-300 Contains 4 pieces of anti-slip pads Digital switching power amplifier KA-3 ---- Cooling fan (including air duct) FJ-300 ---- Vertical extension table TB-0505 ---- Horizontal sliding table S-0505 ---- 2 Vibration Controller A set of digital vibration controller VENZO-820 Functions: Sine, Random, Shock, Resonance Search and Dwell Computer Dell Notebook Keyboard, mouse Logitech Wireless connections Sensor Jufeng Contains 5 meters long and high shielded wire Manual --- ----

System composition:

 

◆ VENZO series vibration control hardware (software functions: sine, random, classic shock, resonance search and dwell).

2 input channels, 1 output channel, 1 COLA output, reserved interface function (digital I/O interface) linked to the environmental test chamber.

◆ Vibration control software package VibExpert:

(1) Sinusoidal vibration control (2) Random vibration control (3) Classic shock control (4) Resonance search and dwell

◆ Accessories: power cord, network cable, electronic version of the "Instruction Manual", a set of software installation CDs, password files, etc.