|
[China]
Trade Verify
Address: No.755, Xianyuehuan Rd, Tianyuan District, Zhuzhou, Hunan Province
Contact name:Shirley
Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
Technical parameters
Valid working space | Customizable |
Max working pressure | 9.8bar |
Pressure time | It takes no more than 25 min to reach 58 bar. |
Cooling time (full load) | Cooling time for sintering Temperature 1450℃～100℃: 7-8h (Empty furnace, water temperature≤26℃, 9.5bar≤pressure≤9.8bar) |
| Max.loading weight | The load capacity depends on the product type |
Service life for furnace shell | 20 years |
Operating times for furnace shell | 6000 furnaces |
Max. Design Temperature | 1600℃ |
Max. Working Temperature | 1580℃ |
| Pumping speed | The vacuum degree can reach 5Pa within 30min after starting the pump. After reaching 5Pa and then pumping for 60min, the ultimate vacuum value reaches 1Pa (within a cold, empty and clean furnace that has been dried before). |
| Leakage rate | ≤3Pa/h (stop the pump group operation and start checking after testing the limit vacuum (within a cold, empty and clean furnace that has been dried before). |
| Wax yield rate | ≥98%(10kg pure paraffin, argon negative pressure dewaxing. Measured by three times of mean values at most). |
UPS guarantee time | It can power the indicator light and control the furnace during power outage for more than 80 minutes. |
| Max.heating rate | 8℃/min (the room temperature rises to 1580℃ within a vacuum and empty furnace. 600℃, 1000℃, 1200℃ half-way insulation is allowed). |
