Large Flow Titanium Water Filter Plate Low Filtration Resistance Differential Pressure

• Product introduction

Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature.

• Production Steps

Filtrate-- Isostatic compaction--Vacuum sintering

• Features of titanium sintered porous materials:

• Specification of titanium sintered porous materials

• Properties of titanium sintered porous materials

1. Pore diameter uniformity, pore stability, high separation efficiency.
2. High porosity, low filtration resistance, and high permeability.
3. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance.
4. Good mechanical properties, low differential pressure, large flow.
5. Strong anti-microbial ability, does not interact with microorganisms.
6. Online regeneration, easy cleaning, long service life.
7. Excellent electromagnetic shielding performance.
8. Good damping and shock resistance.

• Application of titanium sintered porous materials

1. Decarburization filtration of pharmaceutical liquids.
2. Electrolytic gas industry precision filtration, gas distribution.
3. The medical industry makes biological implants.
4. Water treatment industry odor sterilization filtration and ozone aeration.
5. Clarification and filtration in food and beverage processing.
6. Prefiltration of reverse osmosis system for the electronics industry.
7. High-pressure air filtration in the aerospace industry.
8. Filtration and recovery of precious metal catalysts in the fine chemical industry.
9. The electrode matrix of a fuel cell.
10. Catalyst carrier in gas and liquid catalytic reactions.

​                                

• Precautions for the use of titanium sintered porous materials

1. During installation, disassembly and clean avoid scratches, collisions and falls on hard objects.
2. Install correctly to avoid reverse filtering.
3. Avoid instant pressurization when the filter element works.
4. When the filtration efficiency is less than 50%, the filter element should be cleaned in time.
5. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times.
6. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.