Compressed Metal Knitted Mesh Filters Rings Shape Gaskets With Copper Material

Compressed Metal Knitted Wire Mesh Filters Gaskets In Copper / Stainless Steel

We supply Knitted Wire Mesh Filters Tube Gasket Axial Compressed, also mesh washers, knitted wire mesh mufflers, exhaust silencers and seals. Used mainly as auto parts for exhaust system and EMI shielding system.

Introduction of compressed knitted wire mesh filters

Availability of knitted mesh filters

• In continuous lengths, cut to length or fabricated into finished gaskets by spot welding and stitching to suit customer requirements.

• Variety of profiles and sizes available.

• Fabricated gaskets.

• Compressed mesh rings.

• Self adhesive backing is not recommended with this version of mesh.

Design Considerations of knitted mesh filters

• Consideration should be given to the termination of cut mesh ends. Sometimes loose wires are evident after cutting. JUMAO are experts at mesh termination however if you choose to cut the mesh yourself loose wires can be avoided by: – Dipping the end in glue, – Spot welding the cut end. – Sewing the cut mesh end.

• Compression forces required to achieve good contact. Also the rigidity of the host metalwork.

• Galvanic compatibility. Select from a choice of wire.

• Water and moisture sealing is not possible with this product. However it does offer a limited dust seal.

• Solid knitted wire mesh suffers from compression set. So it is not recommended for frequent opening of panels.

Applications of knitted mesh filters

Gasket for the shielding of electric and magnetic fields where there is no requirement for water tight sealing as well. Elastic recovery is obtained with expanded materials of various types such as Silicone, Neoprene and EPDM. These are recommended for panel systems, electrical control panels, doors, etc., which must be disassembled or opened with a certain frequency, therefore the need for the elastic recovery of the gasket.