Active Member
|
[China]
Address: Industrial zone at Fangqiao street, Yixing City, Jiangsu Province, China
Contact name:xyh
Wuxi Sinoprs Ecotech Co., Ltd |
|
|
Compact Wastewater Treatment System
The coagulation area of this series of water purifiers adopts a star-shaped mixed reaction process. The precipitation area adopts a double-layer differential flow inclined pipe structure. The filtration area adopts a combined backwashing method of external gas and water, which is very suitable for complex water quality conditions. Coupled with automatic dosing device and disinfection equipment, it can become a water purification station (factory) with a full set of functions.
This series of water purification devices not only have a wide range of applications, good treatment effects, and excellent effluent quality, but also have small self-consumption, low power consumption and small footprint. It saves water, electricity and labor, and can completely replace traditional small and medium-sized water plant equipment.
Inlet water pressure | ≥0.1Mpa |
Design surface load of sedimentation zone | 5~8m³/m2.h |
Applicable raw water temperature | 5~40℃ |
Design filter speed of filter area | 8~10m/h |
进水悬浮物含量限值 Suspended substance content limit of inlet water | ≤3000mg/L |
Filter washing intensity (water washing) | 10~15L/m2.s(T≈5min, 可调) 10~15L/m2.s(T≈5min, adjustable) |
净水出水悬浮物含量 Suspended substance content in purified outlet water | ≤3mg/L | 滤池冲洗强度(气洗) Filter washing intensity (air washing) | 10~15L/m2.s(T≈5min, 可调) 10~15L/m2.s(T≈5min, adjustable) |
总停留时间 Total retention time | 60~70min | 滤料(石英砂) Filter material (quartz sand) | 粒径0.6-1.2mm,堆厚1000-1400mm Particle size 0.6-1.2mm, pile thick 1000-1400mm |
List of corollary equipment
| Model | Water production (t/h) Water production | Inlet pipe (mm) Inlet water pipe
| Water production pipe (mm) Produced water pipe | Drain pipe (mm) Water discharge pipe
| Mud discharge pipe (mm) Sludge discharge pipe | Pump (inlet) Pump (feed water) | Pump power (KW) Pump power | Equipment weight Equipment weight | Running weight Operating weight |
| FS-10 | 10 | DN50 | DN80 | DN200 | DN150 | IS50-32-125A | 2.2 | 7 | 27 |
| FS-30 | 30 | DN80 | DN125 | DN200 | DN150 | IS80-65-125A | 5.5 | 12 | 72 |
| FS-50 | 50 | DN125 | DN150 | DN250 | 2×DN150 | IS80-65-125A | 5.5 | 21 | 121 |
| FS-100 | 100 | DN150 | DN200 | DN300 | 3×DN150 | IS150-125-250C | 11 | 42 | 242 |
| FS-125 | 125 | DN150 | DN200 | DN300 | 4×DN150 | IS150-125-200B | 15 | 52 | 277 |
| FS-150 | 150 | DN200 | DN250 | DN350 | 4×DN150 | IS150-125-200A | 15 | 78 | 328 |
| FS-200 | 200 | 2×DN150 | 2×DN200 | 2×DN300 | 6×DN150 | IS200-200-250C | 22 | 104 | 508 |
| FS-300 | 300 | 2×DN200 | 2×DN250 | 2×DN350 | 8×DN150 | IS150-125-20 0C | 22 | 156 | 712 |
1. The direction of the inlets of the various pipelines can be changed by 180 degrees to meet the needs of the overall layout.
2. Pump type selection and motor power are only reference values (H≤15m), and the required operating parameters should be determined according to the actual engineering conditions on site.
