SINO 3 Axis Digital Linear Scales Readout DRO Display With Sensor Technology

SINO Digital Linear Scale 3 Axis Screen Readout DRO Display Sensor Mill Lathe EDM Grinding

SINO 3 Axis Digital Linear Scales Readout DRO Display With Sensor Technology

These features make the graphics function easier to use. It is the first factory in China to use a 16- and 32-bit calculator in a DRO system, and it has an input frequency of up to 5 MHZ with A/B, making it the most advanced in the world.

Features:

3 Axis Capability: The SINO DRO system supports up to 3 axes, allowing you to monitor and measure the position of multiple machine axes simultaneously.
Digital Linear Scales: The system utilizes digital linear scales, which are precision measurement devices that detect linear displacement and convert it into electrical signals.
Screen Readout DRO Display: The DRO display unit provides a clear and easy-to-read screen that shows the measured position readings in a digital format.
Compatibility: The system is compatible with a range of machine tools, including milling machines, lathes, EDM, and grinding machines.
Sensor Technology: The sensors used in the system are designed to accurately detect linear displacements and provide reliable position feedback.

Usage:

Installation: Mount the digital linear scales on the machine axes that you want to measure. The scales are typically attached parallel to the axis of motion, using mounting brackets or screws.
Connection: Connect the scales to the DRO display unit using the provided cables and connectors. Ensure proper connection and secure the cables to avoid interference or damage.
Calibration: Perform the calibration procedure to align the scales with the machine axes and set a reference point. Calibration ensures accurate readings throughout the measuring range.
Configuration: Configure the DRO display unit based on your machine and application requirements. This may involve setting measurement units (metric or imperial), resolution, and other parameters.
Operation: Start the machine and observe the position readings on the DRO display unit as you move the machine axes. The real-time readings allow you to track and control the machine positioning accurately.

SDS2-3VA DRO System Features: 

The LCD display is commonly used in lathe, drilling, boring, and milling machines, and it supports all Chinese optical linear glass scales.

Its ability to switch between Chinese and English on a single display makes it more useful for users of milling machines and lathes from many nations.

Error Correction in Linear Form

Memory Interrupted by Power

slumber switch

Calculating in mathematics

Interface RS-232-C (optional)

Specifications of SINO SDS2-3VA digital readout system + linear scale encoder
 

A high-performance universal display console with milling, lathe, and grinding capabilities is provided by the SDS2-3VA.

This three-axis type supports the connection of up to three linear encoders. To combine axes or modify the input to fit equipment made by other manufacturers, there are more interfaces available. Please refer to the compatibility guide for encoders below.

strong die cast casing with a front panel membrane that is both haptic and long-lasting.

large, easily readable LCD screen.

PCD, line of holes, 200 zero memory, radius/diameter display, and tool offsets are among the features.

Product image /photos:

The rack in the picture is optioned, not standard product.