Active Member
|
[China]
Address: No.133,Bldg.12, Zhong Hai Xi An Hua Fu, Shajiang Road, Songgang Street, Bao An district, Shenzhen
Contact name:Liu
Shenzhen Silvercnc Tech Co., Ltd. |
|
|
High Efficiency 5 Axis Vertical Machining Center For Small Metal Parts Processing 800S UMT
Product Characteristics
Direct Drive
1. Good dynamic response ability
2. No reverse break joint, No transmission mechanical abrasion
3. Using Torque motor as main drive of rotate axis
4. U/UMT type C-axis configure low-speed/high-speed torque motor to complete high precision milling and turning
Precision linear guideways on X/Y/ axes-provide high speed rapids.
High quality castings provide a solid structure and foundation.
Full enclosed way covers.
Direct drive servo motors on all axes.
High speed rapids standard-higher speeds available on axes and
spindle.
Product Parameters
| Item | Technical parameter | KMC800S V | KMC800S U | KMC800S UMT(With turning) |
| Working range | Maximum swing diamete mm | — | Φ1100 | Φ1100 |
| Workbench diameter mm | 1140x805 | Φ800x630 ▲ | Φ750 | |
| Maximum product weight Kg | 1400 | 1400 | 1400 (Milling)700(turnning) | |
| Route | X/Y/Z-axis motion quantity mm | 800 / 800 / 550 | 800 / 800 / 550 | 800 / 800 / 550 |
| A-axis rotation range | — | -130°~+130° | -130°~+130° | |
| C-axis rotation range | — | unlimited | unlimited | |
| Tool spindle | Maximum torque S1 / S6 Nm | 125/125 ▲/120▲/200▲ | 125/125▲/120▲/200 ▲ | 125/125 ▲ |
| Maximum Rpm rpm | 14000/18000 ▲/10000▲ | 14000/18000 ▲/10000 ▲ | 14000/18000▲/10000▲ | |
| Rated power kw | 30 | 30 | 30 | |
| Clamp | HSK-A63 | HSK-A63 | HSK-A63 | |
Spindle central water discharge Spindle-directing | Unsupported, supported A supported | Unsupported, supported A supported | Unsupported, supported ▲ supported | |
| Positioning lock | Unsupported | Unsupported | supported | |
| A-axis drive | A-axis drive mode | — | Torque motor dual direct drive | Torque motor dual direct drive |
| Rated torque Nm | — | 5400 | 5400 | |
| C-axis drive | C-axis drive mode | — | Direct drive torque motor | Direct drive torque motor |
| Rated torque Nm | — | 1210 | 1490 | |
| Maximum Feeding speed | X/Y/Z m/min | 48 | 48 | 48 |
| A-axis rpm | — | 20 | 20 | |
| C-axis rpm | — | 70 | 800 | |
| Control solution | X/Y/Z-axis mm | 0.001,0.0001▲ | 0.001,0.0001▲ | 0.001,0.0001▲ |
| C-axis | — | 0.001°,0.0001°▲ | 0.001°,0.0001°▲ | |
| Full close-loop control | X/Y/Z-axis | Standard | Standard | Standard |
| A-axis/C-axis | — | Standard | Standard | |
| Positioning accuracy | X/Y/Z-axis mm | 0.008,0.005 ▲ | 0.008,0.005 ▲ | 0.008,0.005 ▲ |
| A-axis/C-axis | — | 8", 5"▲ | 8", 5"▲ | |
| Repeated positioning accuracy | X/Y/Z-axis mm | 0.005,0.003 ▲ | 0.005,0.003 ▲ | 0.005,0.003 ▲ |
| A-axis/C-axis | 5",3"▲ | 5", 3" ▲ | ||
| Tool Magazine | Capacity | 42 | 42 | 42 |
| Maximum tool diamet mm | Φ125 | Φ125 | Φ125 | |
| Maximum tool length mm | 300 | 300 | 300 | |
| Maximum tool weight kg | 8 | 8 | 8 | |
| Attachment ▲ | Wireless probe mm | repeated accuracy±0.003 | repeated accuracy±0.003 | repeated accuracy±0.003 |
| Automatic q-setter mm | repeated accuracy±0.003 | repeated accuracy±0.003 | repeated accuracy±0.003 | |
| Machine weight | Net weight | about 17.5 tons | about 17.5 tons | about 17 tons |
| CNC System | Supplier | KEDE Numerical Control Co., LTD | ||
| iype | GNC62 Bus mode CNC system | |||
| HMI | 15inches,191inches | |||
Five axis numerical control system highlights
1. Synchronous thread cutting
2. Cone interpolation
3. Polar coordinate interpolation
4. Cylindrical surface interpolation ・ Spline interpolation
5. Complete Five-Axis Technology (RTCP TCTP Bevel Processing)
6. System supports wireless probe, tool setting tool access
7. Error compensation function - two-way pitch compensation, straightness compensation (including isotropic deflection compensation) and verticality compensation
8. Secondary Development and Offline 3D Simulation System
9. High-speed information interaction
10. High resolution, precise high frequency control scheduling
11. Precise position/angle perception
12. Multi-channel control technology
13. High-speed and high-precision machining
14. Variable pitch thread
15. Polar coordinate interpolation
