Home Companies MINGCHENG GROUP LIMITED

Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A

MINGCHENG GROUP LIMITED

Contact Us

[China] country

Trade Verify

Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

Contact name:Amy Tse

Inquir Now

MINGCHENG GROUP LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A

Country/Region china
City & Province dongguan guangdong
Categories Nitrile Rubber
InquireNow

Product Details

Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A

Two-component addition type silicone rubber Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a Shore A 5~55 rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids,which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Features

Convenient to operate because the RTV property

Easy to mix due to the low viscosity (7000~9000Cps)

High duplication because of high tear and tensile strength

Long shelf life with low shrinkage

Can be accelerated for rapid cure

 

Applications

1. A range of materials can be cast into the cured silicone mold:

polyurethane and other reactive resins

Small pieces of cement,plaster,concrete products.

Food like chocolate,fondants

Wax,candle,soap;

Low melt metal

 

 

 

Technical Properties

 

Item No.MCPLA-L20A/B
AppearanceViscous liquid
ColorTranslucent
Viscosity ( cps,approx.)7000-9000
Mix ratio (A:B)1:1
Working time(at 25℃ ,minutes)30~40
Curing time(at 25℃,hrs,approx.)4~6
Hardness Shore A(after 24 h)20
Tensile Strength(Mpa,after 24 h)3.8
Elongation(%)580
Tear Strength(N/mm)16
Linear Shrinkage (%)0.1


 

Note:

1.Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.

2.Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.

 

 

Packaging
20kg per drum, 200kg per drum


Storage and shelf life

When the silicone rubber is stored at or below 25 degree Celsius in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months’ stockpiles, please use tool to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

1.Store the original packing tightly sealed and at a temperature below 25 degree Celsius.Use the product as soon as the packaging has been opened.

2.Close the lid tightly after taking out the proper amount of liquid silicone rubber.

Use the product as soon as the packaging has been opened.

 

Hot Products

Platinum Cure Translucent RTV2 Liquid Silicone Rubber For Candle, Soap Molds Making 20 Shore A Two...
1:1 Translucent Platinum Cured Silicone Rubber High Temperature Resistant RTV2 Liquid Silicone ...
RTV2 condensation Liquid Silicone Rubber for Plaster Molds Making DESCRIPATION Silicone rubber MCSIL...
Fabric Coating Silicone Transparent RTV2 Liquid Silicone Rubber For Textile Coating Description ...
Impression Silicone Putty for Equine Hoof Treatment Silicone Putty 60 shore A Introduction Silicone ...
Silicone Moulding Putty For Resin Molds 40 Shore A Temperature Resistant Introduction of silicone ...