Active Member
|
[China]
Address: Sunbow Industrial Park, 2nd Industrial Zone, Xiacun Community, Gongming , Guangming New District, Shenzhen 518106
Contact name:Chris
Shenzhen Sunbow Insulation Materials MFG. CO., LTD |
|
|
Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing Heat Shrink Tube
Model number:SB-SBRS-3XG
Product description:
Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing Heat Shrink Tube adopts flame retardant, cross-linked polyolefin with an inner coating of hot-melt adhesive and outer layer that shrinks to provide electrical and mechanical protection. The outer layer has excellent insulation, wear and corrosion resistant performances. Inner layer has the excellence of low melt point and waterproof etc. It has passed UL, RoHS, Reach certifications with 600V and 300V.
Product application:
Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing Heat Shrink Tube with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire spices, breakouts, and connector-to-cable transitions.
Property:
1. 3:1 shrink ratio
2. longitudinal shrink 8% max
3. out jacket flame retardant
4. super sealing against water, moisture or other contaminants
5. continuous operating temperature: -45C - 125C
6. shrink temperature: 70C - 125C
Technical data:
| Property | Test Method | Standard |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 |
| Elongation | ASTM D2671 | ≥300 |
| Tensile Strength after Aging(MPa) | UL224 158℃*168hrs | ≥7.3 |
| Elongation after Aging(MPa) | UL224 158℃*168hrs | ≥200 |
| Dielectric Strength(KV/MM) | IEC243 | ≥15 |
| Volume Resistivity(Ω.cm) | ASTM D876 | ≥1*1014 |
Hot melt adhesive property:
| Property | Test Method | Standard |
| Water Absorption | ASTM D570 | ≤0.2% |
| Softening Point | ASTM E8 | 95℃ |
| Strength of Pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of Pearing(AL) | ASTM D 1000 | 80N/25mm |
Dimension:
| Inner Diameter | As Supplied(mm) ID | After Recovery(mm) | Standard Package (m/roll) | |||
| (mm) | (inch) | ID | Whole Wall Thickness | Adhesive Thickness | ||
| Φ2.4 | 3/32 | ≥2.4 | ≤0.80 | 0.85±0.15 | 0.40±0.10 | 200 |
| Φ3.2 | 1/8 | ≥3.2 | ≤1.00 | 0.95±0.15 | 0.40±0.10 | 200 |
| Φ4.8 | 3/16 | ≥4.8 | ≤1.60 | 1.10±0.15 | 0.40±0.10 | 100 |
| Φ6.4 | 1/4 | ≥6.4 | ≤2.20 | 1.20±0.15 | 0.45±0.10 | 100 |
| Φ7.9 | 5/16 | ≥7.9 | ≤2.70 | 1.35±0.15 | 0.50±0.10 | 100 |
| Φ9.5 | 3/8 | ≥9.5 | ≤3.20 | 1.45±0.20 | 0.50±0.15 | 50 |
| Φ12.7 | 1/2 | ≥12.7 | ≤4.20 | 1.70±0.20 | 0.50±0.15 | 1.22 |
| Φ15.0 | 5/8 | ≥15.0 | ≤5.20 | 1.80±0.20 | 0.55±0.15 | 1.22 |
| Φ19.1 | 3/4 | ≥19.1 | ≤6.30 | 2.00±0.20 | 0.55±0.15 | 1.22 |
| Φ25.4 | 1 | ≥25.4 | ≤8.50 | 2.10±0.25 | 0.55±0.15 | 1.22 |
| Φ30.0 | 1-1/4 | ≥30.0 | ≤10.20 | 2.20±0.25 | 0.60±0.15 | 1.22 |
| Φ39.0 | 1-1/2 | ≥39.0 | ≤13.50 | 2.40±0.25 | 0.60±0.15 | 1.22 |
| Φ50.0 | 2 | ≥50.0 | ≤17.00 | 2.70±0.25 | 0.80±0.15 | 1.22 |
| Φ64.0 | 2-1/2 | ≥64.0 | ≤21.00 | 3.00±0.30 | 0.80±0.20 | 1.22 |
| Φ76.0 | 3 | ≥76.0 | ≤25.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ90.0 | 3-1/2 | ≥90.0 | ≤30.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ100 | 4 | ≥100 | ≤34.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ125 | 5 | ≥125 | ≤42.00 | 3.00±0.30 | 1.00±0.15 | 1.22 |
Color: black, red, yellow, green, blue, clear.
Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing Heat Shrink Tube
