Active Member
|
[China]
Address: Sunbow Industrial Park, 2nd Industrial Zone, Xiacun Community, Gongming , Guangming New District, Shenzhen 518106
Contact name:Chris
Shenzhen Sunbow Insulation Materials MFG. CO., LTD |
|
|
Semi Rigid heat shrink tubing / Polyolefin Tubing Meltable Liner 6.0mm
Model Number: SB-SBRS-(4X) GR
Working temperature: -45ºC ~ 125ºC
Shrink temperature: 70ºC ~ 125ºC
Shrink ratio: 4:1
Structure: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1 adopts flame retardant, cross-linked polyolefin material with an inner coating of hot-melt adhesive and outer layer that shrinks to provide electrical and mechanical protection. The outer layer has excellent insulation, wear and corrosion resistant performance. The inner layer has the excellence of low melt point and waterproof etc. It has passed UL, RoHS, Reach certifications with 600V/300V.
Usage: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1 allows a few sizes to cover a wide range of splices and component diameters, mechanically tough tubing provides strain relief and abrasion protection of wire splices, terminals, and other components, adhesive-lined against fluids, moisture and other contaminants.
Standards: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
Production standards: UL224, CAN/CSA C22.2 NO198.1-99
Features: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
Technical data: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
| Property | Test Method | Standard |
| Tensile strength(MPa) | ASTM D2671 | ≥12 |
| Elongation | ASTM D2671 | ≥300 |
| Tensile strength after aging(MPa) | UL224 158C*168hrs | ≥7.3 |
| Elongation after aging(%) | UL224 158C*168hrs | ≥200 |
| Dielectric strength(KV/mm) | IEC243 | ≥15 |
| Volume resistivity(Ω.cm) | ASTM D876 | ≥1*1014 |
Hot melt adhesive property: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
| Property | Test Method | Standard |
| Water absorption | ASTM D570 | ≤0.2% |
| Softening point | ASTM E8 | 95C |
| Strength of pearing(PE) | ASTM D1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D1000 | 80N/25mm |
Dimension: Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
| Inner Diameter | As Supplied(mm) | After Recovery(mm) | Standard Length | ||||
| (inch) | (mm) | ID | Max ID | Whole Wall Thickness | Adhesive Thickness | (m/roll) | (m/pc) |
| 1/4 | φ6.0 | 6.0 | 1.27 | 1.26±0.30 | 0.50±0.30 | 100 | — |
| 5/16 | φ8.0 | 8.0 | 1.65 | 1.70±0.30 | 0.75±0.30 | 100 | — |
| 1/2 | φ12.0 | 12.0 | 2.41 | 2.10±0.30 | 0.95±0.30 | — | 1.22 |
| 3/4 | φ18.0 | 18.0 | 4.45 | 2.60±0.30 | 1.30±0.30 | — | 1.22 |
Color: Standard color is black (other color available upon request).
Semi-Rigid Heat Shrinkable Polyolefin Tubing with Meltable Liner 6.0mm Black VW-1
