Shenzhen Jiayi Technology Co., Ltd. |
Verified Suppliers
|
|
cell phone signal booster for cell phone signal booster for 5g booster weboost home multiroom
|
Specificatio |
Model | JY814 | ||||||||||||||
Technique Data | GSM | CDMA | DCS | WCDMA | TDD-LTE | FDD N66 | TDD N77/N78 | ||||||||
Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | Uplink | Downlink | ||
Frequency Range(MHz) | 824-835 /890-915 | 869-880 /935-960 | 890-915 /1710-1785 | 935-960 /1805-1880 | 890-915 /1710-1785 | 935-960 /1805-1880 | 1710-1785 /1920-1980 | 1805-1880 /2110-2170 | 2515-2675 | 2515-2675 | 1710-1780 | 2110-2200 | 3300 | 4200 | |
Max. Gain(dB) | 65 | 75 | 65 | 75 | 65 | 75 | 65 | 75 | 65 | 70 | 65 | 70 | 65 | 70 | |
Max. Gain (dBm) | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | 20±2 | ||||||||
Max. Output Power(dB) | ≤6 | ||||||||||||||
intermodulation (dBc) | ≤36 | ||||||||||||||
VSWR | ≤1.5 | ||||||||||||||
RF Connector | N(F) | ||||||||||||||
power interface | DC5.5-2.1 | ||||||||||||||
operating voltage | DC5V | ||||||||||||||
operating current | <2A | ||||||||||||||
input voltage | AC100~240V,50-60Hz | ||||||||||||||
Product size | 210*55*160mm | ||||||||||||||
Package size | 315*215*80mm |
Installation |
Installation Instructions
Installation Method: 1. Find the strongest direction and position
of the received signal for mobiles at the top or the periphery of
the building, as the location for installing the outdoor antenna,
pay attention that the location should be paid to lightning
protection. The installation height should not be higher than the
lightning protection network of the building. If it is higher than
the lightning protection network. If it is necessary, install a
lightning rod 1 meter above the outdoor antenna and ground it well.
2. After selecting the appropriate location, fix the outdoor
antenna to the wall or bracket. 3. Select an appropriate location
in the relevant indoor location (close to the power supply and the
outdoor antenna end, rain-proof, sunshine-proof and ventilation is
best location) install indoor straight machine, and fixed to the
wall or bracket. 4. Lead the outdoor antenna to the 'BTS' (outdoor)
interface, and the connection between the outdoor antenna and the
amplifier is completed. 5. After defining the indoor antenna
installation position, fix the antenna. 6. The indoor antenna
connected to the amplifier, one port connecting to the indoor
antenna interface, and the other port connecting to the repeater's
'MOBILE' (indoor) port.